TE Connectivity, MTA-100 Cover 640550-5

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Socket Covers

A range of TE Connectivity slide on covers to protect terminated MTA sockets.
Part numbers X-640550-X are dust covers for MTA-100 IDC closed end connectors
Part numbers X-640642-X are dust covers for MTA-100 IDC feed thru connectors
Part numbers X-643075-X are strain relief covers for MTA-100 IDC closed end connectors
Part numbers X-643077-X are strain relief covers for MTA-100 IDC feed-thru connectors.
The dust covers are made from wite UL94V-0 rated polyester
The strain relief covers are made from UL94V-2 rated nylon

Approvals

UL (E28476); CSA (LR7189)

Approvals

UL (E28476); CSA (LR7189)

TE Connectivity MTA-100 2.54mm Interconnect System

MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size.

Specificaties
Kenmerk Waarde
Cover Type Dust
For Use With MTA-100 Series
Series MTA-100
7500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 2500)
0,055
(excl. BTW)
0,067
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
2500 +
€ 0,055
€ 137,50
*prijsindicatie
Related Products
Two-piece backshells for use with the 5.7mm Mega-Fit ...
Description:
Two-piece backshells for use with the 5.7mm Mega-Fit dual row receptacle housings to provide strain relief. These Mega-Fit receptacle backshells have a hermaphroditic dseign and are availble as standard 94V-0 versions (part numbers 200122-00xx) or with Glow Wire Compliance per ...
A key style terminating tool for 0.1inch pitch ...
Description:
A key style terminating tool for 0.1inch pitch MTA socket connectors. The tool is profiled to press discrete wires onto individual socket terminations. Ideal for prototyping and maintenance.
These Miniature AMP-IN terminals are designed as mechanical ...
Description:
These Miniature AMP-IN terminals are designed as mechanical holding devices to enhance the soldering of hookup wires to the PCB. This design eliminates the need for costly manual wire preparation. The wire is accurately positioned and held in place by ...
The male contact comes in two versions: • ...
Description:
The male contact comes in two versions: • the rigid version is used with 2 to 4 way packages• split version is recommended for 6 to 15 way packages, to reduce the connector insertion forceBlanking pins are provided to block ...