TE Connectivity MATE-N-LOK II Series 4 Way Interface Seal for MATE-N-LOK Connectors

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

TE Connectivity Universal Mate-N-Lok Connector Interface Seals

TE Connectivity Universal Mate-N-Lok splashproof connector interface seals for use with Universal Mate-N-Lok sealed connectors to create a splash proof/immersion proof connection when mating two free hanging connectors. These Universal Mate-N-Lok interface seals are made from silicone rubber and are to be used in conjunction with TE Connectivity Universal Mate-N-Lok wire seals (see stock number 366-1945 typically), one interface seal and two wire seals are required per mated assembly.
Stock number 366-1850 is a 2 way interface seal
Stock number 366-1872 is a 3 way interface seal
Stock number 366-1888 is a 4 way interface seal
Stock number 680-2111 is a 6 way interface seal
Stock number 366-1901 is a 9 way interface seal
Stock number 680-2118 is a 12 way interface seal
Stock number 366-1939 is a 15 way interface seal
Stock number 720-2143 is a 3 way low mating force interface seal which deson't meet IP 5/6 or IP 5/7 requirements
Stock number 811-7027 is a 4 way interface seal for use with Mate-N-Lok II housings

TE Connectivity Universal MATE-N-LOK™ Range

Specificaties
Kenmerk Waarde
Type Interface Seal
Connector Type MATE-N-LOK
Number of Contacts 4
Series MATE-N-LOK II
Material Silicone Rubber
Colour Black
Series Number 794785
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 5)
0,912
(excl. BTW)
1,104
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 95
€ 0,912
€ 4,56
100 - 370
€ 0,696
€ 3,48
375 - 1495
€ 0,638
€ 3,19
1500 - 2995
€ 0,51
€ 2,55
3000 +
€ 0,46
€ 2,30
*prijsindicatie
Verpakkingsopties
Related Products
TE Connectivity Universal Mate-N-Lok connector wire seals essentially ...
Description:
TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board ...
PCB connector contacts are one of the key ...
Description:
PCB connector contacts are one of the key component parts of printed circuit boards. They are used to complete the circuit by conducting electrical current from the connector to the PCB. The connector will often be contained within a PCB ...
A range of Cable clamps / Strain Relief ...
Description:
A range of Cable clamps / Strain Relief for Mate-N-Lok Connectors. Each article constitutes half of a cable clamp, it is thus necessary to order two of them to facilitate assembly for a complete clamp. The material for these MATE-N-LOK ...
A range of pin and socket crimp contacts ...
Description:
A range of pin and socket crimp contacts for use in Commercial MATE-N-LOK 2.54mm connector housings. These pin and socket contacts feature a locking lance for secure retention and are available with pre-tin or gold plating and a variety of ...