AMPLIMITE HDP-20 d-sub cable plug,15 pin

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AMPLIMITE D-Sub Cable Connector HDP-20 Crimp Snap-In Contact Series

TE Connectivity's range of crimp d-sub connectors boast tin plated steels shells with a 94V0- black thermoplastic inserts. These AMPLIMITE are high density crimp connectors, approximately 65% higher density then HD-20 connectors.

The AMPLIMITE series are designed to be used in communication and data interfaces.

• 65% higher density than HD-20 connectors
• Space saving
• 94V0 black thermoplastic insert
• Tin plated, steel shell

Accessories:

• Crimp contacts – 446-787
• Male screw retainers – 450-9208 & 717-4498
• Female screw-locks – 717-4543 & 450-9270
• Locking post assembly – 450-9365
• Spring latch – 450-9321
• Latching block with threaded hole – 450-9371
• Latching block with slot recess – 680-9392

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 15
Gender Male
Body Orientation Straight
Housing Material Steel
Series AMPLIMITE HDP-20
Dimensions 39.14 x 12.54 x 17.7mm
Depth 17.7mm
Width 12.54mm
Length 39.14mm
Voltage Rating 250 V ac
Minimum Operating Temperature -55°C
Maximum Operating Temperature +105°C
5600 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 800)
0,715
(excl. BTW)
0,865
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
800 +
€ 0,715
€ 572,00
*prijsindicatie
Related Products
The Mean Well GSxxE series offers power adapters ...
Description:
The Mean Well GSxxE series offers power adapters with low no load power consumption ˂0.3W, this plug in power supply also complies with energy saving regulations, such as ErP step 2 and EISA 2007. The Mean Well 2 pin Euro ...
These 8656 Series D-Subminiature Connectors have removable crimp ...
Description:
These 8656 Series D-Subminiature Connectors have removable crimp contacts (supplied separately) and will accept the standard range of FCI accessories such as hoods and locking devices. Range of Sub-D connectors for crimp connection.Indents on male connectors.Products are UL certified.Bulk boxes ...
Tinned metal housing with laminated ribbing for the ...
Description:
Tinned metal housing with laminated ribbing for the shielding. Installation in KSG 183, 184 und 185 possibleIndividual contact assignment, thus also partial assignmentCompatible with all common makesCan also be applied to external tools.
Crimp & poke d-subs available in 5 industry ...
Description:
Crimp & poke d-subs available in 5 industry sizes/positionsStandard Density (9 pin, 15 pin, 25 pin, 37 pin, 50 pin).Low cost commercial version of military standard. Nickel or Tin shells.Allows for easy loading of only the positions required.Crimp & Snap-in ...