RECEPTACLE, PIGGYBACK TERMINAL, PIDG,RED

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity PIDG Faston 250 Piggyback Receptacle Wire Crimp Terminals

PIDG (Pre-Insulated Diamond Grip) Faston 250 quick disconnect piggyback receptacle wire crimp terminals with a mating area designed for uniform reliability in the most difficult circuit environments. These PIDG piggyback wire terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG piggyback terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. These PIDG piggyback wire terminals also feature a funnelled wire entry which prevents turned back wire strands and allows fast wire insertion during high-speed production. Available with various wire, barrel and stud sizes, these PIDG piggyback terminals offer a versatile solution to a wide range of wiring applications

Features and Benefits

High conductivity copper body
Copper sleeve for improved wire insulation support
Serrations in wire barrel for maximum contact and tensile strength
Colour coded sleeves for easy wire size and tooling identification
Funnelled wire entry for easy wire insertion
Design enables a reliable and uniform crimp

Application

These PIDG wire terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.

TE Connectivity PIDG Terminals

Specificaties
Kenmerk Waarde
Series PIDG FASTON .250
Insulation Insulated
Insulation Material Nylon
Minimum Wire Size mm² 0.3mm²
Maximum Wire Size mm² 1.5mm²
Minimum Wire Size AWG 22AWG
Overall Length 23.54mm
Maximum Wire Size AWG 16AWG
Tab Size 6.35 x 0.81mm
Colour Red
Contact Plating Tin
Tab Thickness 0.81mm
Contact Material Phosphor Bronze
Tab Width 6.35mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 500)
Was € 0,39
0,355
(excl. BTW)
0,43
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
500 - 500
€ 0,355
€ 177,50
1000 - 1500
€ 0,33
€ 165,00
2000 +
€ 0,297
€ 148,50
*prijsindicatie
Related Products
Avikrimp Fully Insulated Quick Disconnect, Female, for 18-22 ...
Description:
Avikrimp Fully Insulated Quick Disconnect, Female, for 18-22 AWG Wire, Mylar Tape.
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
FASTON 250 series Ultra-Fast Plus fully insulated receptacle ...
Description:
FASTON 250 series Ultra-Fast Plus fully insulated receptacle crimp terminals designed to prevent shock and electrical short circuits from exposed leads. The housings of these FASTON 250 series Ultra-Fast plus receptacle crimp terminals completely enclose a tin plated copper alloy ...
PIDG insulated Faston 110 quick disconnect receptacle wire ...
Description:
PIDG insulated Faston 110 quick disconnect receptacle wire crimp terminals with a mating area interface of 2.79 x 0.79mm (stock numbers 719-6105, 457-5283 and 680-5757 2.79 x 0.51mm, stock number 680-6059 2.79 x 0.41mm and stock number 680-3054 2.79 x ...