TE Connectivity PIDG Series Insulated Tin Plated Crimp Pin Connector, 0.12mm² to 0.4mm², 26AWG to 22AWG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity PIDG Wire Pin Crimp Terminals

PIDG (Pre-Insulated Diamond Grip) wire pin crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire crimp pin terminals consist of a precision-formed high conductivity copper body and barrel. Inside the barrel are serrations which provide maximum contact and tensile strength after crimping. The wire barrel is surrounded with copper sleeve which provides improved wire insulation support and prevents fraying. An outer colour coded nylon sleeve aids wire size identification and a funnelled entry prevents turned back wire strands allowing fast wire insertion during high-speed production. The construction of these PIDG terminals and the use of specialised tool dies allows a uniform and reliable crimp to be produced. Available with various wire and pin sizes these PIDG wire pin crimp terminals offer a versatile solution to a wide range of wiring applications

Features and Benefits

• High conductivity copper body
• Copper sleeve for improved wire insulation support
• Serrations in wire barrel for maximum contact and tensile strength
• Colour coded sleeves for easy wire size and tooling identification
• Funnelled wire entry for easy wire insertion
• Design enables a reliable and uniform crimp

Applications

These PIDG wire terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.

TE Connectivity Crimp Pin Connector

The TE Connectivity insulated yellow-coloured crimp pin connector belongs to the PIDG (Pre-Insulated Diamond Grip) series. This PIDG crimp pin connector is solderless electrical connection used to terminate stranded wire by inserting the stripped end of the wire into a part of the terminal. Inside the barrel are serrations which provide maximum contact and tensile strength after crimping. The wire barrel is surrounded with copper sleeve, which provides improved wire insulation, supports and prevents fraying.

Features and Benefits

• Available in different colour-coded covers for easy wire size and tooling identification
• Barrel type is a close barrel
• Design enables a reliable and uniform crimp
• Funnelled wire entry for easy wire insertion
• It has electro tin plating for improved resistance to corrosion
• Made from high conductivity copper alloy for improved wire insulation support
• Nylon is used as an insulating material
• Operation temperature is 170°C
• Overall length is 18.45mm
• Wire size is in between 22AWG and 26AWG

Applications

• Motors
• Lifting equipment
• Aerospace
• Transportation
• Lighting
• Panel boxes
• Power supply instruments

TE Connectivity PIDG Terminals

Specificaties
Kenmerk Waarde
Series PIDG
Insulation Insulated
Insulation Material Nylon
Minimum Wire Size mm² 0.12mm²
Overall Length 18.45mm
Maximum Wire Size mm² 0.4mm²
Minimum Wire Size AWG 26AWG
Maximum Wire Size AWG 22AWG
Shrouded/Unshrouded Unshrouded
Pin Diameter 1.14mm
Pin Length 6.9mm
Colour Yellow
Contact Plating Tin
Contact Material Copper
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 50)
0,636
(excl. BTW)
0,77
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 200
€ 0,636
€ 31,80
250 - 1200
€ 0,526
€ 26,30
1250 +
€ 0,508
€ 25,40
*prijsindicatie
Related Products
A range of french colour coded insulated bootlace ...
Description:
A range of french colour coded insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and color coding to french standard NF C 63-023: 1994-02.For ...
A range of insulated bootlace wire ferrules made ...
Description:
A range of insulated bootlace wire ferrules made from soft tin plated electrolytic copper with a polypropylene insulating sleeve with dimensions that conform to DIN 46228-4: 1990-09 and special colours.For suitable hand crimp tools see stock numbers 803-4405, 803-4427, 803-4402, ...
Altech Uninsulated ferrules prevent wire strands from fraying ...
Description:
Altech Uninsulated ferrules prevent wire strands from fraying and breaking and are extremely cost effective. Their shorter lengths and uninsulated bodies offer unique advantages, such as making terminations in printed circuit board terminal blocks and in other terminal blocks with ...
Closed end splices made from copper, tin plating ...
Description:
Closed end splices made from copper, tin plating with nylon (PA) insulation. These closed end wire splices are ideal for electrically joining cables or for storing/insulating the ends of spare cables.