TE Connectivity DuraSeal Series Blue Insulated Crimp Receptacle, 6.35 x 0.8mm, 1.5mm² to 2.5mm², 16AWG to 14AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Receptacle

From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)

• Red 0.25 - 1.6 mm²
• Blue 1.0 - 2.6 mm²
• For appropriate Crimps see RS 680-2063, RS 680-2893, RS 680-5876

Approvals

UL

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Series Duraseal
Insulation Insulated
Insulation Material Nylon
Minimum Wire Size mm² 1.5mm²
Gender Female
Maximum Wire Size mm² 2.5mm²
Minimum Wire Size AWG 16AWG
Maximum Wire Size AWG 14AWG
Tab Size 6.35 x 0.8mm
Colour Blue
300 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13000 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
Was € 0,73
0,491
(excl. BTW)
0,594
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 +
€ 0,491
€ 24,55
*prijsindicatie
Related Products
From RS PRO a high-quality insulated crimp receptacle ...
Description:
From RS PRO a high-quality insulated crimp receptacle terminal sometimes known as a female quick disconnect. Female crimp receptacles are a type of electrical wiring connector which, when mated with a male tab connector (or male quick disconnect), provide a ...
PIDG (Pre Insulated Diamond Grip) FASTON 250 fully ...
Description:
PIDG (Pre Insulated Diamond Grip) FASTON 250 fully insulated crimp receptacle terminals designed for providing reliable and uniform terminations in challenging circuit environments. These PIDG FASTON 250 crimp receptacles consist of a precision formed high conductivity tin plated brass body ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
PIDG insulated Faston 110 quick disconnect receptacle wire ...
Description:
PIDG insulated Faston 110 quick disconnect receptacle wire crimp terminals with a mating area interface of 2.79 x 0.79mm (stock numbers 719-6105, 457-5283 and 680-5757 2.79 x 0.51mm, stock number 680-6059 2.79 x 0.41mm and stock number 680-3054 2.79 x ...