TE Connectivity Crimp Terminal Cover

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

TE Connectivity FASTON 250 Crimp Terminal Insulation Boots

A range of insulation boots for use with FASTON 250 crimp terminals. These FASTON 250 insulation boots are made from transluscent plastic and are available in both straight and flag configurations.

TE Connectivity Crimp Terminal Boot

The TE connectivity is FASTON 250 series receptacle contacts insulation sleeve. The housing is made of soft vinyl chloride material.

Features and Benefits

It is available in both straight and flag configuration Operation temperature ranges between -40°C and 105°C Overall length is 24mm

Certifications

UL 94V-2

Faston

Specificaties
Kenmerk Waarde
Length 24mm
350 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1900 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,184
(excl. BTW)
0,223
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 200
€ 0,184
€ 9,20
250 - 1200
€ 0,169
€ 8,45
1250 - 2450
€ 0,157
€ 7,85
2500 - 4950
€ 0,145
€ 7,25
5000 +
€ 0,137
€ 6,85
*prijsindicatie
Verpakkingsopties
Related Products
DuraSeal crimp ring terminals with an environmentally sealed ...
Description:
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal ...
Positive Lock 110 Mark III crimp receptacle housings ...
Description:
Positive Lock 110 Mark III crimp receptacle housings designed for use in electronic gas igniter applications. The positive lock 110 Mark III housing provides insulation to the positive lock receptacle and features internal locking ramps for a secure connection with ...
A range FASTIN-FASTON 250 tab and receptacle housings ...
Description:
A range FASTIN-FASTON 250 tab and receptacle housings for use with FASTIN-FASTON 250 wire terminals. The housings are made from nylon with a UL 94 V2 or UL 94 V0 flammability rating and are designed to provide electrical and mechanical ...
A range of MK I 250 Series Positive ...
Description:
A range of MK I 250 Series Positive Lock connector housings for both tab and receptacle crimp terminals with a 6.35mm mating face area dimension. These MK I 250 Series Positive Lock connector housings have Polyamide 6.6 housings with either ...