Weidmuller Stripax Plus Ratchet Crimping Tool for Bootlace Ferrule

  • RS-stocknr. 452-473
  • Fabrikantnummer 9021920000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Bootlace Ferrule Strips

Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped and terminated. The automatic ferrule feed action allows efficient cable preparation and considerable time saving. The tool (which must be ordered separately) is moulded in glass filled polyamide and is lightweight in use.

The multifunction Stripax® Plus tool (Stock no. 452-473)

Note

Tool Length 210mm, Weight 260g

Weidmuller Stripax Plus is a professional multi-function tool designed for most demanding customers. It has been designed with a quality and durability in mind from the best materials to ensure long life operation.
The Stripax Plus allows for cutting, stripping and crimping of wires and cable ferrules. It features an automatic feed function for efficient cable preparation for manual wiring applications and ferrule crimping.

Features and Benefits:
• An efficient and multifunctional tool allowing for cutting, stripping and crimping
• Versatile tool for efficient wires and cable ferrules preparation over the complete cross-section range of 0.5 to 2.5 mm²
• Easy ferrule handling, contained inside tool in strip form with automatic feed function
• Integrated ratchet mechanism guarantees precise crimping
• Release option in the event of incorrect operation
• Compact size: only 210mm long
• Weight: 260g

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Approvals

-

Specificaties
Kenmerk Waarde
Series Stripax Plus
Crimp Connector Type Bootlace Ferrule
Crimp Tool Type Ratchet
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
38 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
167,92
(excl. BTW)
203,18
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 167,92
Related Products
Weidmuller PZ 6 Roto is a professional tool ...
Description:
Weidmuller PZ 6 Roto is a professional tool designed for most demanding customers. It has been designed with a quality and durability in mind from the best materials to ensure long life operation. Unique features such as Rotatable Crimp Insert ...
The KAA-0760 ergonomic hand crimp tool is designed ...
Description:
The KAA-0760 ergonomic hand crimp tool is designed for crimping red, blue and yellow pre-insulated crimp terminals with wires of cross-section range from 0.5 to 6.0mm2. This ratchet hand crimp tool has asymmetric colour-coded die nests, a ratchet with safety ...
From TE Connectivity, this range of tab and ...
Description:
From TE Connectivity, this range of tab and receptacle style crimp contacts are for use with the SUPERSEAL series of automotive wire connectors. The SUPERSEAL crimp contacts utilise a 2-step positive lock when the contact is inserted into housing, and ...
Introducing the professional crimping pliers from Facom that ...
Description:
Introducing the professional crimping pliers from Facom that offer a robust and comfortable solution for work on insulated crimp connectors. Manufactured from ultra-durable materials, these crimpers, ensure the safety of use and high performance. Ergonomically shaped handles offer maximum comfort ...