RS PRO Plier Crimping Tool for Insulated Terminal

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: TW
Productomschrijving

RS Pro Hand Crimping Tool

RS Pro offers a 4 in 1 application crimp tool, a quality hand tool for crimping, wire stripping, cutting bolts and ignition terminals. This hand tool will not only save you time but your work will be presented in a professional manner which makes it the ideal choice for professionals and DIY enthusiast. The crimp application of the tool is simple it connects 2 pieces of material together by compression typically a wire and a connector terminal. The wire stripper application is a joy to use, just slip the wire through the appropriate channel, squeeze and slide the outer sheath off to expose the wire. A great feature of this crimp tool is the capacity to make your own ignition cables like (motorbike as an example), again it’s simply case of preparing the wire, attaching the terminal and squeezing to make the union. And finally a bolt cutter, this application is sometimes overlooked but if you need to trim a bolt simply screw the bolt into the hole and squeeze handle for a precise cut.
So, the RS pro crimp tool has multiple uses and gives you professional results each time, an excellent addition to any toolbox.

Features and Benefits

• Crimp capacity: 1.75 to 6 mm
• Wire stripping capacity: 0.75 to 6 mm
• Compatible with the RS range of red, yellow, and blue terminals
• Bolt cutter: M2.6 to M5
• Insulated - comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

Note: Unsuitable for un-insulated terminals.

FAQ:
How easy are they to use?
They are very easy to use with either hand, there is no formal training required for this crimper.

How do you maintain the product?
• Movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Note

Unsuitable for un-insulated terminals, or mini yellow size.

RS Insulated Crimping Tool

All RS crimp tools are compatible with the RS range of red, yellow, and blue terminals.

Range Compatibility/Tooling Detail

Tool will also cut and strip wire, cut small diameter bolts and crimp ignition terminals

Specificaties
Kenmerk Waarde
Crimp Tool Type Plier
Crimp Connector Type Insulated Terminal
Overall Length 206 mm
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
148 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
9,25
(excl. BTW)
11,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 9,25
Related Products
The Bell Stewart 2980075-01 is a high-quality tool ...
Description:
The Bell Stewart 2980075-01 is a high-quality tool designed for professionals and serious DIY enthusiast. Made from the best quality materials offer a long life and hassle-free operation. This Professional hand tool has been designed for the assembly of shielded ...
Self-adjusting with hardened steel blades.Middle carbon steel sheet ...
Description:
Self-adjusting with hardened steel blades.Middle carbon steel sheet frameGlass filled nylon injection soft handleIntegral wire cutter (for single wires), stripping length adjustment and jaw tension controlReplacement stripping jaws are available (RS 613-050).
CERTI-CRIMP Premium grade double action hand tools (DAHT) ...
Description:
CERTI-CRIMP Premium grade double action hand tools (DAHT) for crimping a wide range of terminals and contacts on to wire. The dies of these double action hand crimp tools travel in an arc-like path. These CERTI-CRIMP premium grade hand crimp ...
From RS Pro, a range of original line ...
Description:
From RS Pro, a range of original line hand crimp tools designed to crimp uninsulated open barrel connectors. The precision hand crimp tools feature a ratchet action mechanism ensuring full crimp cycle is achieved with each use. Tools also benefit ...