Knipex Hand Ratcheting Crimping Tool for Open Barrel Terminal, 0.1 → 1.5mm² Wire
- RS-stocknr.:
- 539-696
- Fabrikantnummer:
- 97 52 14
- Fabrikant:
- Knipex
2 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 188,39
(excl. BTW)
€ 227,95
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 188,39 |
- RS-stocknr.:
- 539-696
- Fabrikantnummer:
- 97 52 14
- Fabrikant:
- Knipex
Datasheets
Wetgeving en compliance
Niet conform
- Land van herkomst:
- DE
Productomschrijving
Crimping pliers for open barrel terminals from 0.1 to 1.5 mm²
Features and benefits
- Extremely user-friendly crimping pliers with lever transmission
- For non-insulated, open plug connectors (2.8 + 4.8 mm plug width and a capacity of 0.1 - 1.5 mm²)
- Toggle lever system for high efficiency
- Integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure
-Capacities mm² / AWG : for non-insulated open barrel connectors from 0.1 to 1.5 mm² - AWG 27 to 16
- Material: special grade chrome vanadium electric steel, oil-hardened
- For non-insulated, open plug connectors (2.8 + 4.8 mm plug width and a capacity of 0.1 - 1.5 mm²)
- Toggle lever system for high efficiency
- Integral lock (with release mechanism) only triggers on reaching the optimal crimping pressure
-Capacities mm² / AWG : for non-insulated open barrel connectors from 0.1 to 1.5 mm² - AWG 27 to 16
- Material: special grade chrome vanadium electric steel, oil-hardened
Applications types
Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop
- Maintenance and repair
- Electrical installations
- Crimp shop
Product Maintenance
- To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
Specificaties
Kenmerk | Waarde |
|---|---|
| Operation | Hand |
| Crimp Tool Type | Crimping Tool |
| Crimp Connector Type | Open Barrel Terminal |
| Wire Size mm² | 0.1 → 1.5mm² |
| Wire Size AWG | 26 → 16AWG |
| Ratcheting | Yes |
| Overall Length | 195 mm |
| Connector Type | Open-barrel terminal |