Molex Ratchet Crimping Tool for Terminal

  • RS-stocknr. 710-6518
  • Fabrikantnummer 63811-7200
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Sabre Contacts & Tooling

Four points of electrical contact for greater contact reliability
14-18 awg
Hand Crimp Tool for Sabre Flat Blade Crimp Terminals
Activation/Deactivation Tool to be used with 43178 Wire to Wire Terminal Series.
Extraction Tool used to extract terminals from housings.

Standards

UL E29179 and UL1950 ; CSA LR19980

Molex Sabre Series

7.5mm pitch
Range of robust, single-row connectors, for high current applications up to 18A
System allowing wire-wire and wire-board connection
Suitable for 14 to 18 awg
Positive locking casings with audible click, to prevent accidental disconnection
Casings polarised to ensure correct mating
Contacts completely insulated within the casing

Specificaties
Kenmerk Waarde
Crimp Connector Type Terminal
Crimp Tool Type Ratchet
3 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
371,34
(excl. BTW)
449,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 371,34
Related Products
Molex hand crimp tool will ensure you get ...
Description:
Molex hand crimp tool will ensure you get complete crimps due to its full cycle ratcheting, it has been ergonomically designed with soft handles. The crimp tool features precise designed crimping profiles and has easy contact positioning. Easy handling as ...
A universal crimp tool frame with die sets ...
Description:
A universal crimp tool frame with die sets available separately for terminating AMP and Western Electric Style data plugs.Tool frame: (stock number 443-895) A ratchet action crimp tool frame with ratchet release and finger operated set screws for rapid location ...
Tools type PZ03 and type KEBS0560 have a ...
Description:
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an ...
The ratchet is pre-set to a specific force ...
Description:
The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial ...