JST, WC Plier Crimp Tool

  • RS-stocknr. 762-0957
  • Fabrikantnummer WC-490
  • Fabrikant JST
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

1.5mm JST ZH Connector Series Crimp Tooling

The 1.5 mm pitch JST ZH Crimp Hand Tools are for use with mini reeled and loose contacts. These ZH Hand Crimp Tools are light weight with a parallel ratchet action for crimping contacts onto single pieces of wire.

Crimp tool stock number 762-0954 is for use with ZH Contacts on a Mini Reel ( see stock number 762-0951 typical )
Crimp tool stock number 762-0957 is for use with loose ZH Contacts ( see stock number 762-0759 typical ) onto single pieces of 16 AWG, 18 AWG and 20 AWG wire.

1.5mm Wire to Board - JST ZH Connectors

The JST ZH connector range is a compact 1.5 mm pitch low profile Wire to Board system. With a thickness of 3.5 mm, an above board height of 5.6 mm for the Top Entry type and 3.7 mm for the Side Entry type the ZH range can provide space saving in various applications.

Specificaties
Kenmerk Waarde
Series WC
Crimp Tool Type Plier
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
429,63
(excl. BTW)
519,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 429,63
Related Products
The Captive pan head screws for CHAMP connectors ...
Description:
The Captive pan head screws for CHAMP connectors are suitable for cable to panel and cable to cable applications: 739-0925 Captive pan head screw 4-40 UNC with an under head length of 19 mm with a thread length of 6.35 ...
The mechanical Phoenix Contact CRIMPFOX 6 crimp tool ...
Description:
The mechanical Phoenix Contact CRIMPFOX 6 crimp tool has been designed for crimping ferrules according to DIN 46228-1 and DIN 46228-4.This CRIMPFOX 6 ferrule crimp tool can crimp a cable cross section range of 0.25 to 2.5mm² (AWG 10 to ...
A range of crimp dies for the Klauke ...
Description:
A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals.Part number 908-2880 suitable for DIN terminals 0.5 ...
ERGOCRIMP hand crimping tools and die set for ...
Description:
ERGOCRIMP hand crimping tools and die set for crimping HN.D, HE/HA and HVT contacts with a wide range of wire sizes. These ERGOCRIMP hand crimping tools are chrome plated with a virtually straight action jaw closure, interchangeable dies and features ...