TE Connectivity CERTI-CRIMP II Ratchet Crimping Tool for AMPLIMITE HD-20 Contacts

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: US
Productomschrijving

TE Connectivity CERTI-CRIMP II Straight Action Hand Crimp Tools

CERTI-CRIMP II Premium grade straight action hand tools (SAHT) for crimping a wide range of terminals and contacts on to wire. The dies of these straight action hand crimp tools close in a straight line. These CERTI-CRIMP II premium grade hand crimp tools are designed to high specifications using high-quality materials to produce high-quality consistent terminations with optimal electrical and mechanical performance. Premium grade hand crimping tools require minimum operator skill to produce high quality crimps to specified parameters. Each hand crimp tool incorporates crimping dies, locating and straightening features that enable the terminals crimped by these tools to meet requirements of applicable TEC application (114-) specifications. These CERTI CRIMP II crimp tools feature contact locators, support and wire stops. Stock numbers 782-9741, 782-9120, 782-1122, 366-1816, 864-3715 and 864-3719 have a flip locator that provides increased accuracy for the location of small terminals. The CERTI-CRIMP II crimp tools for crimping insulated terminals also feature 4 position insulation crimp height adjustment. The whole design of the CERTI-CRIMP II straight action crimp tool ensures that the dies are bottomed independent of operator technique, fatigue or tool wear & tear. The crimp tool features a CERTI-CRIMP ratchet which is factory set to stay locked until the handles of the tool are fully closed and the dies are bottomed. This ratchet mechanism ensures that the tool only opens once a complete crimp cycle is achieved preventing partial crimps. The handles of the crimp tool are set to specific pressures to meet different crimp force requirements. To aid identification wire size information is displayed on the head of the crimp tool.

Features and Benefits

High specification design using high-quality materials
Fixed crimp dies for specific terminal types
Minimum operator skill required
CERTI-CRIMP ratchet control for full crimp cycle assurance
Contact locator and wire stop
Flip locator versions available
4 position insulation crimp height adjustment
Ergonomically designed handles with pre-set handle force pressures
Repairable
Life service of over 50000 cycles if maintained

Applications

These CERTI-CRIMP II premium grade straight action hand crimping tools are used to crimp a wide range of terminals and contacts. Applications include low production runs, prototype work and repairs and any application that requires consistent, high-quality terminations. These CERTI-CRIMP II premium grade hand crimp tools are also suitable for use in most military, UL and CSA applications

Specificaties
Kenmerk Waarde
Series CERTI-CRIMP II
Crimp Tool Type Ratchet
Crimp Connector Type AMPLIMITE HD-20 Contacts
For Use With Rectangular Contacts 20-28 AWG
Wire Size mm² 0.08 → 0.24mm²
Wire Size AWG 28 → 24
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 3)
829,11
(excl. BTW)
1.003,22
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
3 - 498
€ 829,11
€ 2.487,33
501 +
€ 807,85
€ 2.423,55
*prijsindicatie
Related Products
Hand crimping tools for crimping MC4-Evo2 series crimp ...
Description:
Hand crimping tools for crimping MC4-Evo2 series crimp contacts onto conductors. These hand crimping tools easily and safely provide a high quality crimp onto conductors with a wire size range of 4-6 mm2. For conductors with a larger 10mm2 wire ...
K 301/6 K self-setting crimping tool for cable ...
Description:
K 301/6 K self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm². Very light and ergonomicCharacteristicsOne crimping profile for all cross-sections due to automatic cross-section adjustmentWith ratchet for consistently-controlled crimp resultsLateral insertion (side ...
YRS-980 series strip feed hand crimp tool specially ...
Description:
YRS-980 series strip feed hand crimp tool specially designed to crimp JWPF series crimp contacts in strip form. This crimp tool has a parallel operating action and features a ratchet mechanism for achieving a full crimp cycle and crimp conformity. ...
Description:
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. ...