CK Crimp Tool

  • RS-stocknr. 910-7295
  • Fabrikantnummer T3671
  • Fabrikant CK
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: TW
Productomschrijving

CK Solar Crimping Pliers MC3 & MC4

A set of crimping pliers from C.K. have been designed with professionals in mind for the safe and secure crimping of MC3 and MC4 Solar PV Connectors. Heavy-duty frame and jaws made from hardened carbon steel, offer a long life and hassle-free operation. Handles offer an anti-slip, safe and comfortable grip.

Features and Benefits:
• A highly durable hand tool designed for professional use
• Frame and jaws made from hardened carbon steel for improved durability and long life operation
• A lifetime of up to 30000 cycles
• High compression pressure ensure secure crimping
• Especially designed Deadlock system increases safety and delivers precise crimping
• Features Quick release lever for ease of use
• Pressure adjuster allows easy adjustments
• For MC3 and MC4 Solar PV connectors – Wire sizes 2.5, 4.0 & 6mm2

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ's:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.


The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
92,84
(excl. BTW)
112,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 92,84
Related Products
D-Frame crimp tool with a small, lightweight design ...
Description:
D-Frame crimp tool with a small, lightweight design for crimping HE 14 crimp contacts on to conductors with a wire size range of 28 to 24 AWG. This D-Frame crimp tool features a ratchet mechanism remains locked and only releases ...
For constant and accurate crimping of mechanical, electrical ...
Description:
For constant and accurate crimping of mechanical, electrical and electronic connectorsPerfectly positions the wire in the terminal. The position of the crimping dies provides excellent visibility when inserting the connector and wireDie release system for easy die changing without special ...
The Harting crimp tool is a manually operated ...
Description:
The Harting crimp tool is a manually operated single level stripper device. The tool structures a fixed die (crimper), a movable die (anvil), a locator/insulation stop and a ratchet. It is a tool used to join or connect two pieces ...
C Frame hand operated crimp tools with a ...
Description:
C Frame hand operated crimp tools with a double action jaw closure designed for service and repair. These C Frame hand crimp tools feature a ratchet mechanism which stays locked until the handles of the tool are fully closed and ...