- RS-stocknr.:
- 724-0918
- Fabrikantnummer:
- CP500
- Fabrikant:
- Teledyne LeCroy
6 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 7.220,00
(excl. BTW)
€ 8.736,20
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 7.220,00 |
- RS-stocknr.:
- 724-0918
- Fabrikantnummer:
- CP500
- Fabrikant:
- Teledyne LeCroy
Wetgeving en compliance
Vrijgesteld
- Land van herkomst:
- JP
Productomschrijving
Teledyne LeCroy Current Probe & Clamp
The Teledyne LeCroy 6m current probe is a state of the art device created for easy, highly accurate current measurements. The compact probes offer wide bandwidth with over-current protection and utilize a combination of Hall Effect and transformer technology that enables you to take measurements on DC, AC, and impulse currents. It also has a 2MHz bandwidth and is designed to measure continuous currents up to 500Amp.
Note:
The CP030 (801-4858 ) and CP031 (724-0911 ) are compatible with LeCroy X-stream oscilloscopes running firmware version 4.3.1.1 or greater. Their minimum sensitivity is 10mA/div compared with 1mA/div for CPO30A (878-7604 ) and CPO31A (878-7607 ). The maximum conductor size for these four models is 5mm OD. CP150 (801-4855 ) and CP500 (724-0918 ) have minimum sensitivity 100mA/div and maximum conductor size 20mm OD. Teledyne LeCroy current probes have a small form factor which makes probing easier on a crowded compact board.
Note:
The CP030 (801-4858 ) and CP031 (724-0911 ) are compatible with LeCroy X-stream oscilloscopes running firmware version 4.3.1.1 or greater. Their minimum sensitivity is 10mA/div compared with 1mA/div for CPO30A (878-7604 ) and CPO31A (878-7607 ). The maximum conductor size for these four models is 5mm OD. CP150 (801-4855 ) and CP500 (724-0918 ) have minimum sensitivity 100mA/div and maximum conductor size 20mm OD. Teledyne LeCroy current probes have a small form factor which makes probing easier on a crowded compact board.
Features and Benefits
ProBus active probe interface with automatic scaling in A/div
Autozero and degauss capabilities built-into instruments user interface
700 Apeak current
30 Arms continuous current
2MHz bandwidth
100mA/div sensitivity
Compatible with the DSC015
Autozero and degauss capabilities built-into instruments user interface
700 Apeak current
30 Arms continuous current
2MHz bandwidth
100mA/div sensitivity
Compatible with the DSC015
Applications
Switching power supplies
Motor drives
Electric vehicles
Uninterruptible power supplies
Motor drives
Electric vehicles
Uninterruptible power supplies
Certifications
CAT II 600V
CAT III 300V
CAT II
CAT III
CAT III 300V
CAT II
CAT III
Specificaties
Kenmerk | Waarde |
---|---|
Probe Type | AC/DC Current |
Bandwidth | DC → 2MHz |
Model Number p | CP500 |
Safety Category Level | CAT II, CAT III |
Safety Category Voltage | 300 V, 600V |
Current | 500A |
Safety Category | CAT II 600 V, CAT III 300V |
- RS-stocknr.:
- 724-0918
- Fabrikantnummer:
- CP500
- Fabrikant:
- Teledyne LeCroy