Fluke 705, 24mA Current Loop Calibrator - RS Calibration

  • RS-stocknr. 326-4948
  • Fabrikantnummer 0665091
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Fluke 705 Loop Calibrator

Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.

Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.

Features and Benefits:

• 0.02% accuracy
• 24 V loop supply with mA measure
• Simultaneous mA and % of span display
• Selectable step/ramp outputs
• mA sourcing, simulation and measurement
• Compact case and protective holster
• Quick battery replacement

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.

Supplied with

9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Specificaties
Kenmerk Waarde
Calibrated RSCAL
Absolute Maximum Current Measurement 24mA
Best Accuracy ±0.025 %
Resolution 0.001 mA
Safety Category CSA C22.2
Battery Type 9 V
Battery Life 18 h
Power Source Battery
Dimensions 47 x 75 x 164mm
Weight 350g
Height 164mm
Length 47mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Model Number p 705
Safety Category Voltage 30V
Width 75mm
10 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
850,00
(excl. BTW)
1.028,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 850,00
Related Products
Small but mighty, Druck's UPS III loop calibrator ...
Description:
Small but mighty, Druck's UPS III loop calibrator offers maximum results with a compact design. The calibrator forms part of an essential toolbox that one may need for calibration and troubleshooting, instrument maintenance and valve set-up. Druck's loop calibrator offers ...
Easy to use current, voltage and loop calibratorSource ...
Description:
Easy to use current, voltage and loop calibratorSource & measure in 3 current & 3 volt ranges Transmitter/simulator sink functionHigh accuracy 0.02%A large easy to read 4.5 digit LCD which auto-ranges, 0.005% of range resolutionOutput functions include steps, ramps and ...
Loop-mates designed for the calibration, testing and measurement ...
Description:
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, ...
These compact, robust, easy-to-handle calibrators have large LCD ...
Description:
These compact, robust, easy-to-handle calibrators have large LCD screens and are suitable for use in highly diverse on-site conditions. They can calibrate an instrument in its operating environment and without removing it from the process. The principal functions are simulation ...