Fluke i30s Current Probe & Clamp

  • RS-stocknr. 645-1836
  • Fabrikantnummer I30S
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe

The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.

Buy Fluke products and claim another Fluke product free.
Between September 1, 2020 and December 15, 2020 customer who purchase a Fluke product (inc. Fluke Networks) have the opportunity to claim a free product through the Fluke website with the original proof of purchase, invoice, or receipt. The product can be claimed by visiting the Fluke website -
www.fluke.ie/freefluke (Ireland)
www.fluke.be/freefluke (Belgium)
www.fluke.nl/freefluke (Netherlands)
www/fluke.no/freefluke (Norway)
www.fluke.se/freefluke (Sweden)
www.fluke.com/en/freefluke (South Africa)
There are six levels of free tools to claim. They are separated based on the value of the qualifying purchase, starting at as little as only €100. For each level there is a fixed range of products to claim, based on the value of the original purchase.

Warning

  • Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
Specificaties
Kenmerk Waarde
Current 30A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 100kHz
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I30S
Best Accuracy ±1% + 2 mA
Safety Category Voltage 300V
Bandwidth DC → 100 kHz
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
624,00
(excl. BTW)
755,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 624,00
Related Products
5 different probes covering a wide range of ...
Description:
5 different probes covering a wide range of applications.Maximum current measurement coverage up to 6000 Amps.Maximum voltage insulation up to 10 kV peak.Connect to a wall plug or use with batteries.Low loading of the circuit under test.Wide coil operating temperature ...
The Rohde & Schwarz RT-ZC 100MHz current probe ...
Description:
The Rohde & Schwarz RT-ZC 100MHz current probe precisely measures direct and alternating current without interrupting the power circuit for the measurement. Robust design and easy operationEasy deskewing for simultaneous current and voltage measurements.
Superior measurement range from 100mA to 3000 Aac2000 ...
Description:
Superior measurement range from 100mA to 3000 Aac2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied)Low battery and range overload indicationRange selection by robust rotary switchHigh external field rejectionExcellent accuracy over full rangeSmall diameter (10mm) Rogowski ...
Precision current clamp suitable for non-intrusive current measurements ...
Description:
Precision current clamp suitable for non-intrusive current measurements in electrical electronic, process and light industrial systems automotive systems, battery performance testing and battery charging systems.30A ac/dc measurement range Simple push button auto zeroAuto power off conserves battery lifewide ...