Fluke i30s Current Probe & Clamp, With UKAS Calibration

  • RS-stocknr. 653-9879
  • Fabrikantnummer i30s
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

i30s 30A High Resolution, High Bandwidth Oscilloscope Current Probe

The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement.

Hall effect sensing of a.c. and d.c. current
Power LED warns of low battery by flashing
Zero adjust knob to accommodate offsets
The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
2.0m flying lead terminated with 50Ω BNC plugs
Designed to meet EN61010-1, EN61010-2-032 installation CAT III 300V
Withstands overloads to 500A

Supplied with

Alkaline PP3 battery, 4mm shrouded plug adaptor and operators manual.

Fluke AC/DC Current Clamp

The Fluke i30s AC/DC current clamp has a current range of 30A. It is a new age device used with oscilloscopes and DMMs for accurate, non-intrusive measurement and complex waveform currents.
Inclusions:
Alkaline PP3 battery, 4mm shrouded plug adaptor, and an operator’s manual
Warning
Use of the probe on uninsulated conductors is limited to 300VAC RMS or DC and frequencies below 1kHz.

Features and Benefits

• Power LED warns of low battery by flashing
• Zero adjust knob to accommodate offsets
• The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses
• 2.0m flying lead terminated with 50ohm BNC plugs
• Withstands overloads to 500A
• Operating temperature ranges between 0°C and 50°C

Applications

• Inverters
• Switch mode power supplies industrial controllers
• Automotive leakage currents
• Applications requiring accurate isolated current measurement
• Waveform analysis

Certifications

• CAT III 300V
• IEC 61010-1
• Pollution degree 2
• IEC 61010-2-032
• IEC 61326-1
• CE certified
• cCSAus certified
• EN61010-1
• EN61010-2-032

Warning

  • Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc and frequencies below 1 kHz.
Specificaties
Kenmerk Waarde
Probe Type AC/DC
Calibrated UKAS
Maximum Conductor Size 19mm
Safety Category CAT III 300 V
Safety Category Level CAT III
Model Number p I30S
Best Accuracy ±1% + 2 mA
Safety Category Voltage 300V
Bandwidth DC to 100 kHz
18 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
689,00
(excl. BTW)
833,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 689,00
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
The Tektronix is a high performance and easy-to-use ...
Description:
The Tektronix is a high performance and easy-to-use 150A AC/DC current probe designed for use and direct connection to the TekVPI™ probe interface. This AC/DC current measurement probe provides 20MHz of frequency bandwidth with selectable range control for 25A and ...