Fluke i2000 FLEX Current Probe & Clamp, With UKAS Calibration

  • RS-stocknr. 654-1260
  • Fabrikantnummer i2000 FLEX
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

i2000 Flex 2000A a.c. Current Probe

Flexible and lightweight
a.c. coupled output (no d.c. offset)
3 selectable ranges up to 2000A a.c.
Fits around conductors up to 178 mm diameter
Voltage output of 2V full scale for each range
Suitable for use with multimeters, recorders and data loggers
Plugs directly into instruments with 4mm input sockets
Conforms to EN61010-1 CAT III 600V

Supplied with

2 x AA alkaline batteries and operators manual.

Fluke AC Current Clamp

The Fluke AC current clamp has a single current rating of 2000A. It is a new age device used with oscilloscopes, digital multimeters, recorders or data loggers. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using the typical clamp-on current probe. The probe provides a low-voltage output that is proportional to the current being measured.

Inclusions:
2 x AA alkaline batteries and operators manual.

Features and Benefits

• Flexible
• Lightweight
• AC coupled output (no DC offset)
• Three selectable ranges up to 2000AAC
• Fits around conductors up to 178mm diameter
• Voltage output of 2V full scale for each range
• Plugs directly into instruments with 4mm input sockets

Applications

• Inverters
• Switch mode power supplies industrial controllers
• Automotive leakage currents
• Applications requiring accurate isolated current measurement
• Waveform analysis

Certifications

• EN61010-1
• EN 61010-031: 2002
• EN 61010-2-032: 2002
• EN 61010-1: 2001
• CAT III 600V safety rating

Specificaties
Kenmerk Waarde
Probe Type AC
Calibrated UKAS
Maximum Conductor Size 178mm
Safety Category CAT III 600 V
Safety Category Level CAT III
Model Number p I2000
Best Accuracy ±1 %
Safety Category Voltage 600V
Bandwidth 10 Hz → 20 kHz
4 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
413,00
(excl. BTW)
499,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 413,00
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Description:
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.
Superior measurement range from 100mA to 3000 Aac2000 ...
Description:
Superior measurement range from 100mA to 3000 Aac2000 Hours continuous battery life (two AA MN1500 LR6 alkaline batteries, not supplied)Low battery and range overload indicationRange selection by robust rotary switchHigh external field rejectionExcellent accuracy over full rangeSmall diameter (10mm) Rogowski ...