Tektronix TCP0150 Current Probe & Clamp

  • RS-stocknr. 661-3283
  • Fabrikantnummer TCP0150
  • Fabrikant Tektronix
Wetgeving en compliance
Land van herkomst: US

TCP0150 AC/DC current probe

Can be directly connected to DPO4000, MSO4000 and DPO7000 oscilloscopes using the TekVPI interface

Rise time: ≤17.5 ns
RMS max. current: 150 A
Max. inrush peak current: 500 A
Operating temperature: 0 → 50°C

Tektronix Current Probe & Clamp

The Tektronix is a high performance and easy-to-use 150A AC/DC current probe designed for use and direct connection to the TekVPI™ probe interface. This AC/DC current measurement probe provides 20MHz of frequency bandwidth with selectable range control for 25A and 150A measurement ranges. It also provides low-current measurement capability and accuracy to current levels as low as 5mA per division, important for achieving a broad dynamic current range of high-level and low-level measurement signals.

Features and Benefits

• Easy-to-use and accurate AC/DC current measurements
• Connects directly to oscilloscopes with the TekVPI™ probe interface
• Low noise and DC drift
• Provides automatic units scaling and readout on the oscilloscope's display
• Remote GPIB/USB probe control through the oscilloscope
• Split-core probe head construction allows easy connection to conductors
• Easy to degauss and autozero
• set-up controls and probe status and diagnostic indicators are provided on both the probe hardware and through an easy-to-access scope UI display menu


• Power supplies
• Semiconductor devices
• Power inverters/converters
• Electronic ballasts
• Industrial/consumer electronics
• Motor drives
• Transportation systems


• CAT I 600V
• CAT II 600V
• CAT III 300V

Kenmerk Waarde
Current 150A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 20000kHz
Maximum Conductor Size 21 x 25mm
Safety Category CAT I 600 V, CAT II 600 V, CAT III 300 V
Series TCP
Safety Category Level CAT I, CAT II, CAT III
Model Number p TCP 0150
Best Accuracy ±1 %
Safety Category Voltage 300 V, 600 V
Bandwidth DC → 20 MHz
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The Fluke AC current clamp has a single ...
The Fluke AC current clamp has a single current rating of 2000A. It is a new age device used with oscilloscopes, digital multimeters, recorders or data loggers. The flexible measuring head allows current measurements on conductors that are hard to ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.
Tektronix accessories include the industrial-style clamp-on current probes ...
Tektronix accessories include the industrial-style clamp-on current probes A621 ( 851-218 ) and A622 ( 851-224 ) which have mV outputs and enable current waveform measurements on all TekScopes. • For DMMs and oscilloscopes• Safety category voltage is 600V.
The i310s Current Clamp has been designed for ...
The i310s Current Clamp has been designed for use with oscilloscopes and digital multimeters for accurate nonintrusive measurement of AC, DC and complex waveform currents. Using Hall Effect technology, the clamp can accurately measure currents up to 450 A peak ...