Tektronix TCP312A Oscilloscope Probe, Probe Type: Current 100MHz

  • RS-stocknr. 781-0801
  • Fabrikantnummer TCP312A
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix TCP Series

The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( 781-0807 ) is powered directly by oscilloscopes with the TekVPI interface.

Easy-to-use and accurate AC/DC current measurements
Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface
Provides automatic units scaling and readout on the oscilloscope display
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low Noise and DC Drift
Easy to Degauss and Autozero
Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu

Tektronix Oscilloscope Probes

The Tektronix current oscilloscope probe offers current measurement capabilities of 30ADC continuous. The amplifier, when used with provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. This oscilloscope onscreen readout of magnitude and amps reduces measurement errors with no more hand calculations.Note:Requires TCPA300 amplifier available separately

Features and Benefits

Bandwidth is DC to 10MHz Lowest measurable current is 1mA Insertion impedance is 0.7ohm at 100MHz Rise time is 7ns Typically less than 1% DC gain error Bare insulated maximum wire voltage is 150V CAT II and 300V CAT II Low insertion impedance reduces device under test loading Split-core construction allows easy circuit connection Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohm Low DC drift and noise allows improved low-level current measurements

Applications

Development and analysis solutions for designers Installers and service personnel in telecom data communication Computers Semiconductor power electronics environments

Certifications

UL61010-2-032 approved UL61010-1 approved CAN/CSA C22.2 No 61010-1 certified CAN/CSA C22.2 No 61010-2-032 certified EN61010-1 EN61010-2-032 CAT II 150V CAT II 300V

Note

Requires TCPA300 amplifier (764-4391) available separately

Approvals

UL61010-2-032, UL61010-1, CAN/CSA C22.2 No 61010-1, CAN/CSA C22.2 No 61010-2-032, EN61010-1, EN61010-2-032

Specificaties
Kenmerk Waarde
Probe Type Current
Safety Category CAT II 150 V, CAT II 300 V
Series TCP300
Safety Category Level CAT II
Model Number p TCP312A
Safety Category Voltage 150 V, 300 V
Bandwidth 100MHz
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2.220,00
(excl. BTW)
2.686,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.220,00