Tektronix TCP303 Current Probe

  • RS-stocknr. 796-2683
  • Fabrikantnummer TCP303
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix TCP Series

The Tektronix TCP300 Series of split-core current probes incorporates transformer and Hall effect technology. The TCP300 models TCP303 (796-2683 ), TCP305A ( 781-0810 ) and TCP312A ( 781-0801 ) are used with amplifier TCPA300 ( 764-4391 ), available separately, to provide high performance capability from low level milliamp measurements to the measurement of very high current levels. The TCP0030A ( 781-0807 ) is powered directly by oscilloscopes with the TekVPI interface.

Easy-to-use and accurate AC/DC current measurements
Connects to some Tektronix oscilloscopes using the TekVPI™ probe interface
Provides automatic units scaling and readout on the oscilloscope display
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low Noise and DC Drift
Easy to Degauss and Autozero
Setup controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu

Tektronix Current Probe

The Tektronix AC/DC current measurement probe is a highly advanced current measurement system created for the contemporary current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ TPA-BNC) interfaces, current measurements and calculations are simple and easy.

Features and Benefits

• Automatic scaling and units 1 - Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations
• AC/DC input coupling
• Low insertion impedance reduces device under test loading
• Split-core construction allows easy circuit connection
• Status indicators provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohms, noncompatible probe type
• Low DC drift and noise allows improved low-level current measurements
• DC - 15MHz, 150A DC

Applications

• Development and analysis solutions for designers, installers, and service personnel in telecom, Data Communication (Data Comm), computer, and semiconductor power electronics environments
• Power supplies (switching and linear)
• Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
• Power inverters/converters
• Electronic ballasts
• Industrial/consumer electronics
• Mobile communications (phone, satellite, and relay stations)
• Motor drives
• Transportation systems (electronic vehicles, electric trains, locomotives, and avionics)

Certifications

• CAT I 600V
• CAT II 600V
• CAT III 300V
• CAT I
• CAT II
• CAT III
• ICE standard

Specificaties
Kenmerk Waarde
Current 150A
Probe Type AC/DC
Minimum Bandwidth 0Hz
Maximum Bandwidth 50000kHz
Maximum Conductor Size 21 x 25mm
Safety Category CAT I 600 V, CAT II 600 V, CAT III 300 V
Series TCP
Safety Category Level CAT I, CAT II, CAT III
Model Number p TCP303
Best Accuracy ±3 %
Safety Category Voltage 300 V, 600 V
Bandwidth 15MHz
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3.580,00
(excl. BTW)
4.331,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 3.580,00
Related Products
Tektronix current probes include: TCP0020 ( 796-2696 ); ...
Description:
Tektronix current probes include: TCP0020 ( 796-2696 ); TCP2020 ( 796-6705 ); TCP202A ( 796-2687 ). Their applications cover power supplies, semiconductor devices, power inverters/converters, electronic ballasts, industrial/consumer electronics, mobile communications, motor drives and transportation systems. Easy ...
The E3N current clamp is designed to measure ...
Description:
The E3N current clamp is designed to measure AC and DC current using Hall-effect technology. The clamp is long and narrow in shape for measuring cable cores or in confined spaces. Current range: 0.1A to 10 A peak, 0.5A to ...
Tektronix accessories include the industrial-style clamp-on current probes ...
Description:
Tektronix accessories include the industrial-style clamp-on current probes A621 ( 851-218 ) and A622 ( 851-224 ) which have mV outputs and enable current waveform measurements on all TekScopes. • For DMMs and oscilloscopes• Safety category voltage is 600V.
Pico TA167 is a dual-range current probe capable ...
Description:
Pico TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000A. • 200A mode for better performance at lower currents• Auto power-down facility to save battery life• Additional screening to reduce noise pickup ...