Tektronix TCP202A Current Probe

  • RS-stocknr. 796-2687
  • Fabrikantnummer TCP202A
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix AC/DC Current Probes TCP0020, TCP2020 & TCP202A

Tektronix current probes include: TCP0020 ( 796-2696 ); TCP2020 ( 796-6705 ); TCP202A ( 796-2687 ). Their applications cover power supplies, semiconductor devices, power inverters/converters, electronic ballasts, industrial/consumer electronics, mobile communications, motor drives and transportation systems.

Easy to use and accurate AC/DC current measurements
Core jaw diameter of 5mm (0.2 in)
Accurate measurement of current levels as low as 10mA per division
High accuracy with typically less than 1% DC gain error
Split-core construction allows easy circuit connection
Low noise and DC drift

Connects directly to oscilloscopes with the TekVPI probe interface
Provides automatic units scaling and readout on the oscilloscope display
One-button Degauss and AutoZero control for ease of use
Easy access to scope-displayed probe menu for probe setup control and operating status information
Remote control capability through TekVPI oscilloscope

TCP0020

For use with Tektronix DPO2000 & MSO2000
BNC output connects to most oscilloscopes and other measuring equipment (>100 kΩ termination required)
Degauss button and thumbwheel for DC offset adjustment

TCP2020

Connects directly to oscilloscopes with the TekVPI probe interface
Provides automatic units scaling and readout on the oscilloscope display
Degauss button and thumbwheel for DC offset adjustment

TCP202A

Supplied with

Probe ground lead 6 in (152.4 mm) long, Nylon carrying case, instruction manual (English)

Specificaties
Kenmerk Waarde
Current 15A
Probe Type AC/DC
Maximum Bandwidth 50000kHz
Maximum Conductor Size 3.8mm
Safety Category CAT I 300 V
Series TCP
Safety Category Level CAT I
Model Number p TCP202
Best Accuracy ±1 %, ±3 %
Safety Category Voltage 300V
Bandwidth 50MHz
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
2.810,00
(excl. BTW)
3.400,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.810,00
Related Products
The Fluke AC current clamp has a single ...
Description:
The Fluke AC current clamp has a single current rating of 2000A. It is a new age device used with oscilloscopes, digital multimeters, recorders or data loggers. The flexible measuring head allows current measurements on conductors that are hard to ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Description:
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.
Pico TA167 is a dual-range current probe capable ...
Description:
Pico TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000A. • 200A mode for better performance at lower currents• Auto power-down facility to save battery life• Additional screening to reduce noise pickup ...
Pico MI077 current clamp can measure AC and ...
Description:
Pico MI077 current clamp can measure AC and DC currents up to 600A. Two current ranges controlled by selector switchLow–battery indicator Zero offset buttonOutput connectors 4 mm (banana) plug typeAccuracy: DC 0 to 600A ± (2% reading +2A); AC 0 ...