Tektronix A622 Current Probe, With RS Calibration

  • RS-stocknr. 810-5970
  • Fabrikantnummer A622
  • Fabrikant Tektronix
Wetgeving en compliance
Land van herkomst: US

TekScope Accessories A621 & A622

Tektronix accessories include the industrial-style clamp-on current probes A621 ( 851-218 ) and A622 ( 851-224 ) which have mV outputs and enable current waveform measurements on all TekScopes.

Tektronix Current Probe & Clamp

The Tektronix ’long nose’ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. Equipped with a BNC connector, it can be used with a shrouded banana plug adapter*1. It can also be used on digital multimeters, TekMeter, and scopes. This device can measure AC/DC currents from 50mA to 100A peak over a frequency range of DC to 100kHz. It provides 10mV or 100mV output for each Amp measured.

Features and Benefits

• For DMMs and oscilloscopes
• Safety category voltage is 600V


• Motor drives
• Inverters
• Power supplies
• Avionics


• CAT III 600V

Kenmerk Waarde
Probe Type AC/DC
Calibrated RSCAL
Maximum Conductor Size 11.8mm
Safety Category CAT III 600 V
Safety Category Level CAT III
Model Number p A622
Safety Category Voltage 600V
Bandwidth DC → 100 kHz
3 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 888,00
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
The i30 may be used in conjunction with ...
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
Suitable for use with oscilloscopes, recorders and data ...
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
Tektronix current probes include: TCP0020 ( 796-2696 ); ...
Tektronix current probes include: TCP0020 ( 796-2696 ); TCP2020 ( 796-6705 ); TCP202A ( 796-2687 ). Their applications cover power supplies, semiconductor devices, power inverters/converters, electronic ballasts, industrial/consumer electronics, mobile communications, motor drives and transportation systems. Easy ...