AD8418WBRMZ Analog Devices, Current Sense Amplifier Single Bidirectional 8-Pin MSOP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Current Sensing Amplifiers, Analog Devices

Current Sense Amplifiers accurately amplify small voltages in the presence of large common-mode voltage.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specificaties
Kenmerk Waarde
Power Supply Type Single
Typical Single Supply Voltage 5 V
Minimum CMRR 90dB
Number of Channels per Chip 1
Output Type Bidirectional
Maximum Supply Current 130 μA
Mounting Type Surface Mount
Package Type MSOP
Pin Count 8
Dimensions 3.2 x 3.2 x 0.95mm
Height 0.95mm
Length 3.2mm
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
Width 3.2mm
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Temperature +125 °C
50 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
2,296
(excl. BTW)
2,778
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,296
€ 11,48
25 +
€ 1,856
€ 9,28
*prijsindicatie
Verpakkingsopties
Related Products
Current and power measurement for real-time system protection, ...
Description:
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Wide common mode input range -0.3 V to ...
Description:
Wide common mode input range -0.3 V to 26 VLow offset voltage ± 150 μV MaxLow Offset Drift: 0.5 μV/°CSupply voltage range from 2.2 V to 26 VHigh-Side Current Sensing for High Voltage SystemsLow Ohm value Current Sense ResistorsHigh accuracy ...
Current and power measurement for real-time system protection, ...
Description:
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.