Allegro Microsystems ACS730KLCTR-40AB-T, Current Sensor 8-Pin, SOIC

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

The Allegro™ ACS730 current sensor family provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die.

Current Sensing 40A High bandwidth 1 MHz analog output
1.2 mΩ primary conductor resistance for low power loss and high inrush current withstanding capability
5 V, single supply operation
Output voltage proportional to AC or DC current
Factory-trimmed sensitivity and quiescent output voltage for improved accuracy
High PSRR for noisy

Specificaties
Kenmerk Waarde
Offset Voltage 75mV
Package Type SOIC
Pin Count 8
Mounting Type Surface Mount
Dimensions 4.9 x 3.9 x 1.5mm
Maximum Input Voltage 5.5 V
Minimum Input Voltage 4.5 V
Product Height 1.5mm
Product Length 4.9mm
Product Width 3.9mm
46 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
290 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
4,555
(excl. BTW)
5,512
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 18
€ 4,555
€ 9,11
20 - 48
€ 3,555
€ 7,11
50 - 98
€ 2,55
€ 5,10
100 - 248
€ 2,425
€ 4,85
250 +
€ 2,305
€ 4,61
*prijsindicatie
Verpakkingsopties
Related Products
The NIS5232 is a cost effective, resettable fuse ...
Description:
The NIS5232 is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to buffer the load device from excessive input voltage which ...
Description:
The NCP1593 is a fixed 1 MHz, high output current, synchronous PWM converter that integrates a low-resistance, high-side P-channel MOSFET and a low-side N-channel MOSFET. The NCP1593 utilizes internally compensated current mode control to provide good transient response, ease of ...
The Allegro high current sensor IC packages are ...
Description:
The Allegro high current sensor IC packages are fully integrated current sensor solutions that provide high accuracy and reliability. These sensors are automotive-grade devices that can take the heat and deliver highly accurate open-loop current sensing in the most harsh ...
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.