Microchip Technology MCP39F511A-E/MQ, Current Monitor 28-Pin, QFN

  • RS-stocknr. 179-3969
  • Fabrikantnummer MCP39F511A-E/MQ
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The MCP39F511 is a highly integrated, single-phase power-monitoring IC designed for real-time measurement of input power for AC/DC power supplies, providing power and energy values. It includes dual-channel delta sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible 2-wire interface. An integrated low-drift voltage reference in addition to the 94.5 dB of SINAD performance on each measurement channel allows for better than 0.1% accurate designs across a 4000:1 dynamic range.

Power Monitoring Accuracy capable of 0.1% error across 4000:1 dynamic range
Built-In Calculations:
Active, Reactive, Apparent Power
Active and Reactive Energy Accumulation
True RMS Current, RMS Voltage
Line Frequency, Power Factor
Dedicated Zero Crossing Detection (ZCD) Pin
Dedicated PWM Output Pin
Automatic Event Pin Control through Fast Voltage Surge Detection

Specificaties
Kenmerk Waarde
Offset Voltage ±1mV
Package Type QFN
Pin Count 28
Mounting Type Surface Mount
Dimensions 5 x 5 x 0.95mm
Maximum Input Voltage 3.6 V
Minimum Input Voltage 2.7 V
Product Height 0.95mm
Product Length 5mm
Product Width 5mm
146 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 73)
2,029
(excl. BTW)
2,455
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
73 - 73
€ 2,029
€ 148,117
146 +
€ 1,86
€ 135,78
*prijsindicatie
Related Products
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.
The UPD350 is a highly integrated small form ...
Description:
The UPD350 is a highly integrated small form factor USB Type-C/PD controller compliant with USB Type-C™ specification and USB Power Delivery specification v.3.0. UPD350 provides cable detection and orientation, and implements baseband communication with a partner USB Type-C/PD Device. The ...
The CDS4000 current sensor family from Sensitec are ...
Description:
The CDS4000 current sensor family from Sensitec are compact devices offering accurate current measurement. They are able to provide measurement for AC, DC and mixed currents featuring integrated galvanic isolation.Designed for industrial applications, the CDS4000 current sensors are based on ...
FAN4146: Low Power Controller for AC outlet Appliance ...
Description:
FAN4146: Low Power Controller for AC outlet Appliance Leakage Circuit Interrupters (ALCI) and two-wire Residual Current Devices (RCD)FAN4147: Low Power Ground Fault Interrupter (GFI) and two-wire Residual Current Devices (RCD)Precision Sense Amplifier and Bandgap ReferenceBuild-in AC RectifierDirect DC Coupled to ...