Microchip Technology PAC1932T-I/JQ, Current Monitor 16-Pin, UQFN

  • RS-stocknr. 179-3971
  • Fabrikantnummer PAC1932T-I/JQ
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The PAC1932/3/4 are two, three and four-channel power and energy monitoring devices. A high-voltage multiplexer sequentially connects the inputs to a bus voltage monitor and current sense amplifier that feed high-resolution ADCs. Digital circuitry performs power calculations and energy accumulation. This enables energy monitoring with integration periods from 1 ms up to 36 hours or longer. Bus voltage, sense resistor voltage and accumulated proportional power are stored in registers for retrieval by the system master or Embedded Controller.

High-Side Current Monitor with 2, 3 or 4 Channels
100 mV full scale range for current sense voltage,16 bit resolution
Selectable bidirectional current sense
capability, -100 mV to +100 mV range, 16 bit
two’s complement (signed) data format
External sense resistor sets full scale current range
Very low input current simplifies routing
Wide Bus Voltage Range for Voltage Monitor
0V to 32V input common-mode voltage

Specificaties
Kenmerk Waarde
Offset Voltage ±0.1mV
Package Type UQFN
Pin Count 16
Mounting Type Surface Mount
Dimensions 4 x 4 x 0.5mm
Maximum Input Voltage 5.5 V
Minimum Input Voltage 2.7 V
Product Height 0.5mm
Product Length 4mm
Product Width 4mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3300)
0,798
(excl. BTW)
0,966
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3300 +
€ 0,798
€ 2.633,40
*prijsindicatie
Related Products
The Microchip MCP1623 and MCP1624 are Adjustable, Fixed ...
Description:
The Microchip MCP1623 and MCP1624 are Adjustable, Fixed Frequency, Synchronous Step-Up DC-DC Converters. Primarily they are designed to offer a compact and highly efficient power supply solution for PIC Microcontrollers in one-, two- and three-cell battery powered applications. The desired ...
The Microchip MCP16311 is an adjustable output, fixed ...
Description:
The Microchip MCP16311 is an adjustable output, fixed frequency, synchronous, step-down DC-DC converter that operates from input voltage sources up to 30V. Integrated into the device is a high-side and low-side switch, fixed frequency Peak Current Mode Control, internal compensation, ...
Description:
The TC642 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation. A thermistor (or other voltage output temperature sensor) connected to the VIN input furnishes the ...
The BP5293-12 series is one packaged 3terminals Buck ...
Description:
The BP5293-12 series is one packaged 3terminals Buck type DC/DC Converter built-in all parts of DC/DC converter. High efficiency compared with 3 terminals regulator, and not necessary to heat sink. It’s able to rearrange without redesign PCB, because of pin ...