80 A VRPower®, Smart Power Stage With Cu

  • RS-stocknr. 188-5130
  • Fabrikantnummer SIC820ED-T1-GE3
  • Fabrikant Vishay
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

SiC820, 80 A VRPower®, Smart Power Stage With Current Sensing and Temperature Monitor.

Thermally enhanced PowerPAK® MLP56-39L package
Optimize MOSFET switching performance with integrated Schottky diode in LS MOSFET
Up to 80 A continuous current
High frequency operation up to 2 MHz
Power MOSFETs optimized for 12 V input stage and 10 % to 15 % duty cycle operation
3.3 V / 5 V PWM logic with tri-state and hold-off
PWM minimum controllable on time of 30 ns
Diode emulation mode at light loads for high efficiency over the full load range using GLCTRL pin
Low PWM propagation delay (< 20 ns)
Current sense monitor (IMON)
Temperature monitor (TMON)
Over temperature alert
HS MOSFET over-current and short alert
Under voltage lockout for VDRV and BOOT

APPLICATIONS
Synchronous buck converters
Multi-phase VRDs for CPU, GPU, and memory
DC/DC VR modules

Specificaties
Kenmerk Waarde
Package Type PowerPAK MLP39
Pin Count 39
Mounting Type Surface Mount
Dimensions 6.1 x 5.1 x 0.8mm
Minimum Input Voltage 12 V
Product Height 0.8mm
Product Length 6.1mm
Product Width 5.1mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 2)
5,80
(excl. BTW)
7,02
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
€ 5,80
€ 11,60
10 - 98
€ 4,80
€ 9,60
100 - 498
€ 3,95
€ 7,90
500 - 998
€ 3,45
€ 6,90
1000 +
€ 2,90
€ 5,80
*prijsindicatie
Verpakkingsopties
Related Products
50 to 200 A Integrated Current Sensor ICs ...
Description:
50 to 200 A Integrated Current Sensor ICs The Allegro high current sensor IC packages are fully integrated current sensor solutions that provide high accuracy and reliability. These sensors are automotive-grade devices that can take the heat and deliver highly ...
The PAC1934 is a four channel power/energy monitor ...
Description:
The PAC1934 is a four channel power/energy monitor with current sensor amplifier and bus voltage monitors that feed high resolution ADCs. Digital circuitry performs power calculations and energy accumulation. The PAC1934 enables energy monitoring with integration periods from 1 ms ...
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.
The PAC1932/3/4 are two, three and four-channel power ...
Description:
The PAC1932/3/4 are two, three and four-channel power and energy monitoring devices. A high-voltage multiplexer sequentially connects the inputs to a bus voltage monitor and current sense amplifier that feed high-resolution ADCs. Digital circuitry performs power calculations and energy accumulation. ...