Nuvotem Talema Circuit Transformer, -40 → +85 °C, 50A Input,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

Cable primary flying lead current transformer

Very high output voltage & Linearity in small size
Integral flying lead for ease of installation, 24AWG 300V rating 250mm long
All materials UL94-V0
Dielectric withstand voltage 4KVrms
Operating temperature range -40 to +85ºC
Large center-hole allows 6.3mm tabs

Low Cost Current Sense Transformers

Specificaties
Kenmerk Waarde
Input Current 50A
Minimum Temperature -40°C
Maximum Temperature +85°C
Mounting Type Flying Lead
Dimensions 19.0 x 11.5 x 21.5 mm
63 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
216 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,79
(excl. BTW)
5,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 4,79
10 - 24
€ 4,31
25 - 83
€ 4,07
84 - 167
€ 3,83
168 +
€ 3,58
Related Products
The 7KM PAC measuring devices are used to ...
Description:
The 7KM PAC measuring devices are used to measure and indicate all relevant network parameters in low-voltage power distribution. They can be used for single-phase measurements as well as for multiphase measurements in 3 and 4-conductor networks. Accessories for 7KM ...
RS Pro toroidal current sensors are fully encapsulated ...
Description:
RS Pro toroidal current sensors are fully encapsulated for optimal mounting to printed circuit boards. Commonly used to detect branch circuit overload, load drop or shut down, accurate and easy to use. These RS Pro current sensors operate as the ...
RS Pro high current transformers feature a primary ...
Description:
RS Pro high current transformers feature a primary current range 50-150A, 1% accuracy. These current transformers also have dielectric with stand voltage 4KVrms, operating frequency 50/60 Hz, rated burden resistance 33 Ω, all materials UL94-VO and operating temperature -40°C to ...
The RS PRO base mounted split core transformer ...
Description:
The RS PRO base mounted split core transformer has a current ratio of 200:5. It offers an efficient method by which the current can be measured without breaking the conductor, thereby reducing installation and commissioning time. It is a surface ...