Nuvotem Talema Circuit Transformer, -40 → +120 °C, 15A Input,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IN
Productomschrijving

Cable primary high output current transformer

High Output Voltage in small package
Good Linearity over current range
2.5KV Isolation
High Saturation current
Aplications include Power monitoring, Current measurement and instrumentation

Low Cost Current Sense Transformers

Specificaties
Kenmerk Waarde
Input Current 15A
Minimum Temperature -40°C
Maximum Temperature +120°C
Dimensions 12.7 x 17 x 9.53 mm
Mounting Type Through Hole
169 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1,81
(excl. BTW)
2,19
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 1,81
10 - 24
€ 1,76
25 - 99
€ 1,71
100 - 249
€ 1,66
250 +
€ 1,62
Related Products
OMEGA 3 Phase current transformers are suitable for ...
Description:
OMEGA 3 Phase current transformers are suitable for primary ranges from 60 A to 630 A with 5 A secondary. The current transformers allow faster installation directly next to the moulded case circuit breakers for optimised use of space. • ...
RS Pro high current transformers feature a primary ...
Description:
RS Pro high current transformers feature a primary current range 50-150A, 1% accuracy. These current transformers also have dielectric with stand voltage 4KVrms, operating frequency 50/60 Hz, rated burden resistance 33 Ω, all materials UL94-VO and operating temperature -40°C to ...
Primary current range 50-150A1% accuracyOperating frequency 50/60HzTurns ratio ...
Description:
Primary current range 50-150A1% accuracyOperating frequency 50/60HzTurns ratio 2500:1Rated burden resistance 33 ΩDielectric with stand voltage 4KVrmsOperating temperature range -40 to +85ºCAll materials UL94-V0.
Very high output voltage & Linearity in small ...
Description:
Very high output voltage & Linearity in small sizeIntegral flying lead for ease of installation, 24AWG 300V rating 250mm longAll materials UL94-V0Dielectric withstand voltage 4KVrmsOperating temperature range -40 to +85ºCLarge center-hole allows 6.3mm tabs.