Time Electronic 1010 Current & Voltage Calibrator 0 → 30 mA

  • RS-stocknr. 666-0743
  • Fabrikantnummer 1010
  • Warranty 1 jaar
  • Fabrikant Time Electronic
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: GB
Productomschrijving

DC Millivolt Calibrator 1010

Solid state battery/mains powered instrument suitable for applications requiring a precision voltage source of low internal resistance. The 1010 has five ranges up to 10V with a resolution up to 0.01uV. Its small size, robust construction and independence of mains power make it easily portable and convenient for laboratory, field and industrial use. Carry case 816-0191 is available separately for use with Time Electronic 1010 DC voltage calibrator and with Time Electronic 1024 DC current calibrator.

0.01uV to 10V
0.02% accuracy
Battery / mains operation
30mA output current
10 ppm/hr stability
Front panel battery level indicator

Range 0.01uV to 10V
Output 0 – 9.9999V in 5 ranges
0 – 9.9999V in 100μV steps
0 – 999.99mV in 10μV steps
0 – 99.999mV in 1μV steps
0 – 9.9999mV in 0.1μV steps
0 – 999.99μV in 0.01μV steps
Accuracy 10V & 1V ranges: ± 0.02% of setting + ± 0.005% of range.
100mV range: ± 0.05% of setting + ± 0.005% of range, ± 1 μV.
10mV & 1mV ranges: ± 0.05% of setting + ± 0.005% of range, ± 4 μV
Output Resistance 10V, 1V, & 100mV ranges Less than 0.1 ohm (typically 0.05 ohms). 10mV & 1mV ranges 1 ohm
Maximum Output Current 10V, 1V & 100mV ranges –30mA. 10mV & 1mV ranges – up to short circuit value although it should be noted that loads of greater than 1kohm will give greater than 0.1% error
Size 215 x 175 x 190 mm
Weight 3.3kg

Supplied with

internal rechargeable battery

Specificaties
Kenmerk Waarde
Absolute Maximum Voltage Measurement 10V
Absolute Maximum Current Measurement 30mA
Best Accuracy ±0.02 %
Output Voltage Noise 10ppm
Power Source Mains
Dimensions 193 x 217 x 160mm
Weight 3.3kg
Height 160mm
Length 193mm
Maximum Source Current 30mA
Width 217mm
Maximum Source Voltage 10V
Minimum Source Voltage 0.01µV
Model Number p 1010
Plug Type Type G - British 3-pin
Minimum Source Current 0mA
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-10-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.384,35
(excl. BTW)
1.675,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.384,35
Kalibratie-opties
Related Products
Loop-mates designed for the calibration, testing and measurement ...
Description:
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, ...
A portable, high stability, instrument deriving its accuracy ...
Description:
A portable, high stability, instrument deriving its accuracy from a precision aged reference diode and low temperature coefficient metal film resistors. The instrument incorporates overload protection and LED indication of insufficient drive voltage. A Null measuring facility allows dc current ...
RS Pro Portable instrument for calibrating process devices ...
Description:
RS Pro Portable instrument for calibrating process devices and measuring process signals. The quality and accuracy of the hand held calibrator are covered by the four functions; current source, current measurement, power and measurement of a two wire loop and ...
Unique mapping function let you calibrate temperature (300 ...
Description:
Unique mapping function let you calibrate temperature (300 °C) or voltage (220 V) directly (instead of 4 to 20 mA indirectly).A multifunction calibrator and an arbitrary function generator.Simulate a current transmitter.4-20 mA (open voltage 24 V) direct source mode.Make a ...