Erem by Weller 130 mm Cutters, Tool Steel

  • RS-stocknr. 182-357
  • Fabrikantnummer 2432E
  • Fabrikant Weller Erem
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

Erem 2432E Oval Head Side Cutters

The 2432E angled tipped cutters from Erem by Weller provide precise cuts at a number of angles with a super full flush finish. The ergonomic handles allow for reduced fatigue in hands when working over long periods. Made from tough and durable tool steel that makes it suitable for working on electronic boards, component connections due to the ESD protection. The 45° cutting angle coupled with a maximum cutting capacity of 1.2 mm for copper wire and 0.6 for medium hardness wire

Features and Benefits

• Protection of electronic components from risks of electrostatic discharge (ESD)

• ESD compliant for safe use on sensitive electronic components

• Spring return system reduces effort and strain

• Angled Narrow Head Cutters

• Overall length: 130mm

• Cuts copper and Nickel wires Ø: 0.1 – 1.6mm

• Weight: 70g

Typical Applications

Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:

• DIY • Industrial
• Construction
• Electronic Installation

Care and maintenance

Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.

FAQ's

What material is this cutter suitable with?

This cutter is suitable to cut copper wires 0.1 to 1.6 mm.

What is the bevel of this cutter?

The 2432E provides a super full flush cut at 45°.

Specificaties
Kenmerk Waarde
Type Electronic Cutters
Overall Length 130.0 mm
Jaw Length 12.0mm
ESD Safe Yes
Material Steel
Maximum Cutting Capacity 1.6mm
26 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
56 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
63,00
(excl. BTW)
76,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 63,00
Related Products
High-quality diagonal cutting pliers with angled head for ...
Description:
High-quality diagonal cutting pliers with angled head for flush cuts. Manufactured from heat treated high chrome steel, with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a more comfortable controlled grip. Ideal for electronics work, cutting tempered ...
The TriCut electric installation pliers, designed for 3 ...
Description:
The TriCut electric installation pliers, designed for 3 practical functions; cutting, skinning and stripping. Featuring a specially angled head to ensure that cables are stripped and skinned lengthwise along the cable. Using an ergonomic approach, which saves users from applying ...
VDE Insulated diagonal cutters designed for professionals working ...
Description:
VDE Insulated diagonal cutters designed for professionals working with electrical components. These professional BiCut industrial cutting pliers, give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job ...
Tools with precision box joint and captive, low-friction ...
Description:
Tools with precision box joint and captive, low-friction double springSpecial tool steel, oil-hardened and temperedMirror polished with excellent corrosion protectionCutting edge hardness 56 HRCDual component handles for fatigue-free, sensitive work.