Knipex 200 mm Cutters Vanadium Steel

  • RS-stocknr. 442-1007
  • Fabrikantnummer 26 22 200 SB
  • Fabrikant Knipex
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Flat and round nose pliers

Special tool steel, oil-hardened and tempered, polished plier head
Cutting edges also inductive hardened

Flat nose pliers 20 02 160, order no. 106-149

Dual component handles
Short, flat jaws, serrated gripping surfaces

Round nose pliers 22 01 160, order no. 158-5546

Plastic-coated handles
Short, round jaws, smooth gripping surfaces

Radio pliers

25 01 160 order no. 158-5552: Plastic-coated handles
25 02 160 order no. 442-0931: Handles with dual component casing
Half-round jaws, serrated gripping surfaces

Snipe nose pliers 26 12 200, order no. 442-0925 and 26 22 200, order no. 442-1007

Handles with dual component plastic casing
Heavy-duty half-round long nose jaws, serrated gripping surfaces

Specificaties
Kenmerk Waarde
Type Snipe Nose Cutting Pliers
Overall Length 200 mm
Jaw Length 73mm
Material Vanadium Electric Steel
Maximum Cutting Capacity 3.2mm
Cutting Capacity Hard Wire 2.2mm
Cutting Capacity Medium Hard Wire 3.2mm
25 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
28,00
(excl. BTW)
33,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 28,00
Related Products
Stork Beak Pliers with tether attachment point. Distortion-tolerant, ...
Description:
Stork Beak Pliers with tether attachment point. Distortion-tolerant, elastic precision tipsHalf-round, long, pointed jawsCutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wireVanadium electric steel; forged, oil-hardened.
Straight half-round, long jaws with serrated gripping surfaces ...
Description:
Straight half-round, long jaws with serrated gripping surfaces Cutting capacity - medium hard wire 3.2mm Ø, hard wire 2.2mm ØCutting edges additionally induction hardened, hardness approx. 61 HRC Made from vanadium steel, oil-hardened and tempered Chrome-plated head, two-colour two-component handles, ...
This Micro-Tech series of small mesh cutters from ...
Description:
This Micro-Tech series of small mesh cutters from Facom benefits from an exceptionally thin diagonal head (8 mm joint), which enables easy access to components and better visibility for work on high density circuits.Types available are:205-4813 - 405.8MT, 110 mm ...
Electrically discharging version – dissipativePrecision ground cutting edges ...
Description:
Electrically discharging version – dissipativePrecision ground cutting edges without bevel for flush cuttingPrecision shaped tips cut close sitting wire from 0.2mm diameterJoint with stainless steel rivetSmooth movement for minimum operator fatigueOpening spring and restricted openingTwo colour dual component ...