- RS-stocknr.:
- 815-6394
- Fabrikantnummer:
- 77 32 120 H ESD
- Fabrikant:
- Knipex
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-04-2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 158,95
(excl. BTW)
€ 192,33
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 158,95 |
- RS-stocknr.:
- 815-6394
- Fabrikantnummer:
- 77 32 120 H ESD
- Fabrikant:
- Knipex
Datasheets
Wetgeving en compliance
Niet conform
- Land van herkomst:
- DE
Productomschrijving
Electronic cutting pliers carbide cutting edge 120mm
High quality professional ESD diagonal cutters with carbide cutting edges for a clean, strong cut and longer tool life.
For the use of cutting pliers in extreme conditions with hard or tough materials, e.g. piano wire, nickel cable, tungsten filament and diode cable, as increasingly found in the electronics and aerospace industries
For the use of cutting pliers in extreme conditions with hard or tough materials, e.g. piano wire, nickel cable, tungsten filament and diode cable, as increasingly found in the electronics and aerospace industries
Features / Benefits :
KNIPEX - 77 32 120 H ESD
Electronics Side Cutters with carbide cutting edges - 120 mm - ESD - For the use of side cutters under extreme conditions with hard or tough materials, e.g. piano wire, nickel cable, tungsten filament and diode cable, as increasingly found in the electronics and aerospace industries
The right cutting tool is always available, The right cutting tool is always available, even for the hardest materials - Precision carbide cutting edges welded into a forged blank - Robust, backlash-free interlocking hinge - Carbide cutting edge hardness 80 - 83 HRC
Carbide cutting edge pliers have a much longer service life than conventional cutting edge pliers
Reliable cuts at all times thanks to precision carbide cutting edges Always reliable cuts due to non-deforming cutting edges
Significant cost reduction due to longer cutting edge life
Static dissipative handles
Pointed head with groove
With small bevel.
Electronics Side Cutters with carbide cutting edges - 120 mm - ESD - For the use of side cutters under extreme conditions with hard or tough materials, e.g. piano wire, nickel cable, tungsten filament and diode cable, as increasingly found in the electronics and aerospace industries
The right cutting tool is always available, The right cutting tool is always available, even for the hardest materials - Precision carbide cutting edges welded into a forged blank - Robust, backlash-free interlocking hinge - Carbide cutting edge hardness 80 - 83 HRC
Carbide cutting edge pliers have a much longer service life than conventional cutting edge pliers
Reliable cuts at all times thanks to precision carbide cutting edges Always reliable cuts due to non-deforming cutting edges
Significant cost reduction due to longer cutting edge life
Static dissipative handles
Pointed head with groove
With small bevel.
Specificaties
Kenmerk | Waarde |
---|---|
Model Number | 77 32 ESD |
Cutter Type | Side Cutters |
Non Sparking | No |
Overall Length | 120 mm |
Jaw Length | 14mm |
VDE/1000V Approved | No |
Height Safe | No |
ESD Safe | Yes |
Material | Chrome-Plated Steel with Ball Bearings |
Maximum Cutting Capacity | 1.6mm |
Cutting Capacity Stranded Wire | 1mm |
Cutting Capacity Soft Steel Wire | 1mm |
Cutting Capacity Soft Wire | 1.6mm |
Cutting Capacity Piano Wire | 0.2mm |
Cutting Capacity Medium Hard Wire | 0.6mm |
Cut Type | Small Bevel |
Cutting Capacity Hard Wire | 0.6mm |