RS PRO 114 mm Electronic Cutters

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: TW
Productomschrijving

RS PRO ESD Side Cutters

RS PRO professional ESD safe Side Cutters constructed from high carbon steel for strength and durability. These cutters have been designed to cut copper wire below 1.3 mm in diameter and are fully ESD compliant for safe use on sensitive electronic components.
Side cutting pliers are ideal for precision work like gripping, splicing or cutting wires and stripping insulation and are a great hand tool for electricians to keep in their tool kit.

RS PRO have a great range of hand tools including cutters of various sizes and styles to suit all your requirements, with the choice of ESD safe versions. Our range also includes insulated VDE pliers and cutters which are designed to protect you from up to 1000 V.

This range includes the following:
864-0772 – 4.5 inch cutters, Jaw Length: 7mm
864-0785 – 5 inch cutters, Jaw Length: 8mm

Features and Benefits:
ESD safe – black coated handle prevents electrostatic discharge
Suitable for SMD and leads.
Facilitates optimum access
Spring action – eases hand strain during repetitive use
Available in 4.5 inches or 5-inch versions
High carbon steel in blade – for long-term cutting performance
Cutting capacity copper wire: <1.3mm

Typical Applications
Side cutters (also known as diagonal cutters) are used in many applications to cut small wires.
Electrical
Communications and construction work

FAQs

What sizes of Side Cutters are available?
Cutters come in a variety of sizes ranging from 110mm to 280mm (overall length). If a model type comes in different lengths, the jaws will be the same length but the handles will be either shorter or longer. They are usually light in weight due to the fact they are carried around a lot but heavier types with a wide jaw and thick blades are able to cut thicker wires.

Care and maintenance
Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion. Before storing them (in a dry place), make sure they are completely dry to prevent them from rusting.

Specificaties
Kenmerk Waarde
Type Electronic Cutters
Overall Length 114 mm
Jaw Length 7.0mm
ESD Safe Yes
Material HCS
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1007 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
11,57
(excl. BTW)
14,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,57
Related Products
This Micro-Tech series of small mesh cutters from ...
Description:
This Micro-Tech series of small mesh cutters from Facom benefits from an exceptionally thin diagonal head (8 mm joint), which enables easy access to components and better visibility for work on high density circuits.Types available are:205-4813 - 405.8MT, 110 mm ...
Cuts and bends component lead in one action ...
Description:
Cuts and bends component lead in one action allowing retention of the component in a PCB prior to soldering. The lead can be straightened and component removed if required.These special cutting and forming pliers having substantial pressed steel frames, chemically ...
Thin nosed with flush cutting edges for easy ...
Description:
Thin nosed with flush cutting edges for easy access to component leads. These special cutting and forming pliers having substantial pressed steel frames, chemically blackened, with return springs and plastic grips for easy, comfortable handling. Cutting edges are ground to ...
Recessed cutting edges leave 1·5mm of component lead ...
Description:
Recessed cutting edges leave 1·5mm of component lead above the PCB surface for ease of soldering. These special cutting and forming pliers having substantial pressed steel frames, chemically blackened, with return springs and plastic grips for easy, comfortable handling. Cutting ...