RS PRO Cutting Blade for Heat Sealer

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: NL
Productomschrijving

Heat Sealers

2 way knife for ease of cutting material
Electronic timer control for repeatability
Will seal a wide variety of materials including anti-static and polyethylene
Depending on the types of materials used these units will seal from 2 layers of 25 micron (2 x 100 gauge) up to 2 x 200 micron (2 x 800 gauge)
RS Heat-Seal Tubing is 62.5 micron (250 gauge

Note

Heat Sealers supplied with Type G - British 3-pin plug.
Anti-static is pink in colour to differentiate it from standard tubing.

Specificaties
Kenmerk Waarde
For Use With P200 Heat Sealer, P200/C Heat Sealer, P300 Heat Sealer, P300/C Heat Sealer, P400 Heat Sealer, P400/C Heat Sealer, P400/SW Heat Sealer
45 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
3,932
(excl. BTW)
4,758
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 3,932
€ 19,66
*prijsindicatie
Related Products
Walk behind high speed blades that can be ...
Description:
Walk behind high speed blades that can be used from job to job on reinforced concrete and harder building materials. These professional offer patented depth indicators, anti crack gullets and wear indicators to let you work longer and harder. Cuts ...
A robust universal device for professional useNo annoying ...
Description:
A robust universal device for professional useNo annoying dust from cutting and no static chargingFor panel thicknesses → 100 mm and profile cutsReady for use in 10 secondsMains voltage: 230 V; 50 HzPower consumption: 100 WPower up/down times: 12 s ...
Hand-held tool for short-term use and small quantities. ...
Description:
Hand-held tool for short-term use and small quantities. Suitable for cutting and melting the faces of synthetic cords, ropes, straps, belts and fabrics. Cutting tips must be ordered separately.
A selection of carbide tipped brazed turning tools ...
Description:
A selection of carbide tipped brazed turning tools manufactured in 2 standard gradesP30 - Blue - A general purpose grade for small workshops where a variety of steels are machined. Suitable for roughing of steel and castings using moderate feeds ...