Rocol Cutting Paste 500 g Tin

  • RS-stocknr. 691-347
  • Fabrikantnummer 53023
  • Fabrikant Rocol
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RTD Compound

Soft, low melting point metal cutting lubricant in paste form suitable for most operations.

Improves cutting performance and surface finish on all reaming, tapping and drilling operations
Adheres to cutting tool/work-piece - extends tool life
Solvent free

Rocol Cutting Paste

The Rocol 500g RTD compound cutting paste is a soft compound for use in reaming, tapping and drilling and other metal cutting operations. This compound is suitable for all the metals, including hardened steels, nimonics and titaniums. As it contains extreme pressure additives, it significantly reduces friction and gives superb cutting performance and surface finish.

Features and Benefits

• Extends tool life
• Improves surface finish
• Allows increased removal rates
• Reduces production costs
• Reduces wear and tap breakages
• Soft, low melting point metal cutting lubricant in paste form, suitable for most operations
Reduced friction and increased wear resistance
• Solvent-free

Specificaties
Kenmerk Waarde
Package Size 500 g
Trade Name RTD Compound
Biodegradable No
Product Category Compound
Package Type Tin
53 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
339 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
20,79
(excl. BTW)
25,16
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 20,79
Related Products
Foaming metal cutting lubricant for use on vertical ...
Description:
Foaming metal cutting lubricant for use on vertical surfaces or where longer contact time is required. Dissipates heat, does not smoke or fumeAllows heavier close tolerance cutsMulti-metal use, particularly suited for use with high carbon, high speed and high tensile ...
General purpose, mineral, water mix cutting fluidFor light/medium ...
Description:
General purpose, mineral, water mix cutting fluidFor light/medium cutting operations on ferrous and non-ferrous metalsRefined mineral oils give a high degree of residual corrosion protection and lubricity during machiningLow foamingSpecific gravity 0.93BiodegradableDillution Ration 20:1 to 40:1.
Multi-purpose, semi-synthetic water mix, cutting/grinding fluidFor ferrous and ...
Description:
Multi-purpose, semi-synthetic water mix, cutting/grinding fluidFor ferrous and non-ferrous metalsHigh dilution - low sump costExcellent residual corrosion protectionExceptional resistance to bacterial and fungal growthLow foamingSpecific gravity 1.0Dilution ratio; 40:1 to 60:1 for cutting, 50:1 to 70:1 for ...
The RS Pro tool cutting fluid is a ...
Description:
The RS Pro tool cutting fluid is a specially formulated, industrial grade oil. Extension tube attached for getting to those hard to reach parts Extends the life of your tools Reduces the risk of pulling Allows high-speed punching.