Dormer Cutting Fluid 400 g Bottle

  • RS-stocknr. 196-3441
  • Fabrikantnummer SUPERCUT 400G
  • Fabrikant Dormer
Wetgeving en compliance
Land van herkomst: GB

Dormer Supercut Cutting Fluid, 400g Bottle

Supercut cutting lubricant from Dormer comes in a 400g bottle and is a hand applied metal cutting fluid for use on all metals. This cutting fluid helps to reduce heat that is caused by friction to give a great surface finish and helps extend the life of the cutter.

Cutting fluids are very important in machining processes and should have good cooling and lubricating properties. These fluids can be used as either a coolant or lubricant during various metalworking and machining techniques on both the material being worked and the tools working it. By using cutting fluids the following can be achieved, longer tool life by preventing rust and corrosion, reducing scrap and producing parts with the desired surface quality.

Features and Benefits:

Appearance: yellow liquid supplied in a 400g bottle
Excellent cutting performance
Higher viscosity formula
Excellent adhesion to tool - longer tool life
Mineral oil-free
Does not contain sulphur
Low odour fluid, solvent-free formula
Fluid can be used on all metals
Non CFC/HCFC aerosol with low viscosity formula
5L version is also available RS stock number 340-9573

Typical Applications

Cutting fluids provide lubrication and cooling and are generally applied while the machining or cutting operation is taking place. The fluid cools the work piece and tool by carrying away the heat generated during machining. Cutting fluids act as a lubricant at the friction areas, which increases the tool life. Examples of operations where cutting fluids are used include:

Why can’t water be used as a cutting fluid?
Cutting fluid is used to cool the cutter down and lubricate the cutting surface. If water is used it will boil off and it will not lubricate. Water will also cause corrosion problems for the cutter.

Kenmerk Waarde
Package Size 400 g
Trade Name Supercut
Product Category Fluid
Package Type Bottle
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
116 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 17,90
Related Products
Foaming metal cutting lubricant for use on vertical ...
Foaming metal cutting lubricant for use on vertical surfaces or where longer contact time is required. Dissipates heat, does not smoke or fumeAllows heavier close tolerance cutsMulti-metal use, particularly suited for use with high carbon, high speed and high tensile ...
The CRC super tapping fluid II is a ...
The CRC super tapping fluid II is a non-chlorinated tapping lubricant that is suitable for the most severe operations in heavy-duty ranges. The tapping fluid has a 360° spray valve and an extension tube attached making it easier to reach ...
Soft, low melting point metal cutting lubricant in ...
Soft, low melting point metal cutting lubricant in paste form suitable for most operations. Improves cutting performance and surface finish on all reaming, tapping and drilling operationsAdheres to cutting tool/work-piece - extends tool lifeSolvent free.
High performance, mineral oil, water mix cutting fluid ...
High performance, mineral oil, water mix cutting fluid for use on aluminiumProvides extra protection in medium and severe cutting operations when machining aluminiumReduces the risk of staining sensitive aerospace and industrial alloysFor use on ferrous and difficult to machine non-ferrous ...