Loctite 382 TAK PAK Super Glue Kit

  • RS-stocknr. 198-7144
  • Fabrikantnummer 88314
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IE
Productomschrijving

SMT Tak Pak™ 382 Wire Tacking Adhesive Kit

Instant adhesive for wire tacking and component mounting.

Cures in seconds at room temperature
High temperature and thermal cycling resistant
Clean, accurate applications
Will not flow into unwanted areas
Bonds variety of materials, metals, varnished and lacquered surfaces, most plastics, GRP, ceramics, ferrites, rubber and paper
180° peel 2N/mm (12 lb/in.)
Impact shear: 21N/mm² (10ft. lb/in²)
Melting point: 165°C
Tensile strength 25N/mm² (3500psi)

Typical applications:

Terminates wires and coils. Patch circuits. Secures wires
Attaches capacitors. Mounting transformers
Fixing terminal strips. Connecting strain gauge leads

Loctite Super Glue

The Loctite 382 TAK PAK super glue kit is a 20g, 25 ml, high viscosity for use with cyanoacrylate adhesive. It is a single part, fast curing cyanoacrylate adhesive formulated for electronics applications. The LOCTITE® 382™ is designed to use with TAK PAK® accelerators to attain instant cures for tacking electronics components.

Features and Benefits


Cures in seconds at room temperature
• High-temperature and thermal cycling resistant
• Clean, accurate applications
• Will not flow into unwanted areas
• Bonds variety of materials, metals, varnished and lacquered surfaces, most plastics, GRP, ceramics, ferrites, rubber and paper
• 180° peel 2N/mm (12lb/in)
• Impact shear is 21N/mm² (10ft lb/in²)
• Melting point is 165°C
• Tensile strength 25N/mm² (3500psi)

Applications


Terminates wires and coils.
• Patch circuits.
• Secures wires
• Attaches capacitors.
• Mounting transformers
• Fixing terminal strips.
• Connecting strain gauge leads

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Package Size 20 g, 25 ml
Trade Name Loctite 382 Tak Pak
Product Form Gel
Colour Transparent
Package Type Bottle, Kit, Pump Spray
Maximum Operating Temperature +80°C
Minimum Operating Temperature -40°C
Viscosity Gel
37 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
35,46
(excl. BTW)
42,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 35,46
6 - 14
€ 34,04
15 +
€ 33,33
Related Products
This cyanoacrylate adhesive is supplied with an aerosol ...
Description:
This cyanoacrylate adhesive is supplied with an aerosol accelerator (7455) for solid assembly within seconds. It can also eliminate unwanted clearance of up to 0.25mm.Specifically adapted for use with small components, straps, sheaths and coil windings, stress gauges.
Can be used where a very flexible instant ...
Description:
Can be used where a very flexible instant bond is requiredClear in colour, fast curingBonds a wide range of materials4850 (low viscosity): ideal for non-porous substrates4860 (high viscosity): ideal for porous substrates.
Low odour/no fumesAbsence of vapour elimantes blooming of ...
Description:
Low odour/no fumesAbsence of vapour elimantes blooming of surfaces adjacent to the bond line and the possibility of contaminations to delicate electrical and electronic assemblies High strengthFast cure time.
Loctite adhesives are designed for bonding of plastics ...
Description:
Loctite adhesives are designed for bonding of plastics and elastomeric materials where fast bonding is required. Thin bond lines result in high cure speeds, increasing the bond gap decreases the rate of cure, making the 406 perfect for your application ...