MH Connectors MHDCMR Series Zinc Right Angle D-sub Connector Backshell, 25 Way, Strain Relief

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

MH Connectors Metal D-Connector hoods, MHDCMR Series, 90 Degrees

MH Connectors low profile D-connector hoods, MHDDCMR series, this range of D-connector hoods are of Die Cast Zinc construction and offer cable 90 degree entry are re-openeable and offer excellent EMI connector protection with Nickel plating, full metal Jackscrews with 4-40 UNC threading and various sizes of plastic grommets.

Zinc, Nickel plated Backshell halves
Right Angle Cable entry for diameters from 4 to 16.5 mm depending on Series and size
UNC 4-40 Jackscrews
Plastic Grommets

Stock Number Features:

720-3035 9 way K Series, 2 piece ABS compression insert grommet for diameters 4 - 9 mm, Operating temperature -40 to +120 ° C
720-3039 25 way K Series, 2 piece ABS compression insert grommet for diameters 4 - 9 mm, Operating temperature -40 to +120 ° C
821-2753 9 way ULP Series, 1 piece Thermoplastic compression insert grommet for diameters 5.3 - 8.1 mm, Operating temperature -25 to +90 ° C
821-2762 15 way ULP Series, 1 piece Thermoplastic compression insert grommet for diameters 5.3 - 8.1 mm, Operating temperature -25 to +90 ° C
821-2765 25 way ULP Series, Supplied with a metal clamp for diameters 5.8 - 11.4 mm, Operating temperature -25 to +90 ° C
821-2769 37 way ULP Series, 1 piece Thermoplastic compression insert grommet for diameters 8.9 - 16.5 mm, Operating temperature -25 to +90 ° C

Specificaties
Kenmerk Waarde
Number of Contacts 25
D-Sub Shell Size B
Housing Material Zinc
Body Orientation Right Angle
Colour Silver
Strain Relief Yes
Series MHDCMR
80 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
496 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,18
(excl. BTW)
7,48
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,18
10 - 24
€ 5,57
25 - 49
€ 5,24
50 - 99
€ 4,63
100 +
€ 4,32
Verpakkingsopties
Related Products
MH Connectors range of MHDPPK SLIM Series Polyamide ...
Description:
MH Connectors range of MHDPPK SLIM Series Polyamide Hoods are suitable for use with any common Sub-D connectors as well as a selection of other ’D’ type connectors. Available in 7 different colour options, the MHDPPK SLIM hoods feature a ...
2 piece diecast zinc backshells with plastic strain ...
Description:
2 piece diecast zinc backshells with plastic strain relief inserts and earth connectionNickel plate finish. Meets VDE0781 and FCC207 shielding regsAttenuation; >40dB (30MHz to 1GHz)Accepts 3.5mm to 13mm cable.
Backshells for D connectors, enabling top cable entry ...
Description:
Backshells for D connectors, enabling top cable entry on the 9 way and top and side entry on the 15, 25 and 37 way versionsSupplied with jackscrews and strain relief hardware.
The MHDM35 range of Die-Cast Zinc Hoods from ...
Description:
The MHDM35 range of Die-Cast Zinc Hoods from the MH MHulti Hood series feature a two piece zinc body with two body retaining screws. Unlike the standard MHDM series hoods, the MHDC35 range offer a 35° entry for angled and ...