ITT Cannon DL Series Thermoplastic Right Angle D-sub Connector Backshell, 156 Way, Strain Relief

  • RS-stocknr. 406-694
  • Fabrikantnummer DL1-J/S
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Plastic and Metal Hoods

Back shells are supplied with cable strain relief clamps and fit both plug or socket bodies
Thermoplastic hoods provide a cost effective solution. Nickel plated aluminium die-castings are ideal for shielding
The strain relief clamps can be mounted to give either straight or 90° cable entry.

//media.rs-online.com/t_line/L406688-01.gif
//media.rs-online.com/t_line/L406694-01.gif

ITT DL Range

The DL range of zero insertion force (ZIF) multi-pole connectors, with high contact densities is commonly used on diagnostic and test and instrumentation equipment in medical, computer, audio, broadcast and avionics industries.

High pin counts - 60, 96, 156, 260 and 360 way
Long life - 10000 mating cycles
Cam actuated zero insertion force coupling
Backshell/strain relief and polarisation options
Metal and plastic plug and socket bodies
Metal products have excellent shielding properties
Standard and low current contacts available

Specificaties
Kenmerk Waarde
Number of Contacts 156
Housing Material Thermoplastic
Body Orientation Right Angle
Strain Relief Yes
Series DL
37 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
217 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
20,48
(excl. BTW)
24,78
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 20,48
20 - 39
€ 18,44
40 +
€ 16,89
Related Products
From Phoenix Contact, a range of straight and ...
Description:
From Phoenix Contact, a range of straight and angled diecast zinc D-Sub connector housings. The IP20 hoods feature a large inner interior making them suitable for D-Sub connectors with special contacts. The IP20 D-Sub hoods have a cable strain relief ...
Nickel plated ABS hoods to UL94-V0 with conductive ...
Description:
Nickel plated ABS hoods to UL94-V0 with conductive plastic strain relief grommetMeets FCC20780 and European screening requirementsAccepts 4-12mm foil, lap or braided cable For size, see diecast hoods 460-985 etc.
The RS Pro backshell covers allow for either ...
Description:
The RS Pro backshell covers allow for either top or side cable entry. A lightweight ABS housing is nickel plated to optimise EMI/RFI shielding effectiveness. The backshell provides the perfect balance between durability and economical considerations. Lightweight ABS housing, nickel ...
From Harting, these side entry hoods are for ...
Description:
From Harting, these side entry hoods are for use with the Harting series of D-sub connectors. The hoods are constructed from grey thermoplastic and feature internal tin-plate screening, so a robust housing is assured. With a metal lamp and screws, ...