Phoenix Contact DSSC Series Die Cast Zinc Alloy Right Angle D-sub Connector Hood, 15 Way, Strain Relief

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact D-Sub Connector Hoods - Straight & Angled Cable Outlets

From Phoenix Contact, a range of straight and angled diecast zinc D-Sub connector housings. The IP20 hoods feature a large inner interior making them suitable for D-Sub connectors with special contacts. The IP20 D-Sub hoods have a cable strain relief with a 3.0 mm to 9.5 mm external cable diameter. The robust hoods are easily assembled and mounted with the pre-assembled locking screws making them ideal for harsh environments.

Features and Benefits

• IP20 ingress protection, this means that these connectors housings are protected against solid objects up to 12 mm
• Antimagnetic metal sleeve housing
• Bare metallic in colour
• Suitable for harsh industrial environments and conditions due to their strong, sturdy, metal design
• Easy mounting with pre-assembled locking screws
• Straight or angled cable exit points
• Suitable for D-SUB connectors with special contacts, facilitated by the large interior

Specificaties
Kenmerk Waarde
Number of Contacts 15
Housing Material Die Cast Zinc Alloy
D-Sub Shell Size A
Body Orientation Right Angle
Colour Grey
Strain Relief Yes
Housing Material Plating Nickel
IP Rating IP20
Series DSSC
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
13,99
(excl. BTW)
16,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 13,99
10 - 49
€ 13,05
50 - 99
€ 11,04
100 - 249
€ 9,47
250 +
€ 8,22
Related Products
A range of jackscrews for the M Series ...
Description:
A range of jackscrews for the M Series pin and socket connectors. These M Series jackscrews are available in turnable and fixed styles. The turnable jackscrews have a die cast zinc chromate conversion coating with a stainless steel tip. The ...
Transistor pads provide a convenient method of giving ...
Description:
Transistor pads provide a convenient method of giving PCB mounted transistors mechanical supportTO5 provides a 2.8mm spacing for three or four lead devicesMaterial: Black flame-retardant polypropyleneMaximum operating temperature 100°CHeight above board 3.0mm.
These backshells are ideally suited for use with ...
Description:
These backshells are ideally suited for use with ITT Cannon D*JK filter 'D' connectorsThey provide an excellent solution for the D*W series as depth of the shell accommodates the extended insulator length of this rangeEMI/RFI shielding obtained with integrated shielding ...
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...