3M 3357 Series Steel D-sub Connector Backshell, 15 Way

  • RS-stocknr. 163-1447
  • Fabrikantnummer 3357-9215
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

9 to 37-Way Metal Backshells

Metal shells accept round ribbon cable
Rapid assembly time
Ensures protection from EMI/ESD
For mounting thumb screws see stock no. 448-5578

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specificaties
Kenmerk Waarde
Number of Contacts 15
Housing Material Steel
Body Orientation Straight
Series 3357
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
524 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,09
(excl. BTW)
6,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 49
€ 5,09
50 - 99
€ 4,40
100 - 249
€ 4,28
250 - 499
€ 4,17
500 +
€ 4,06
Related Products
Universal clam shell style straight or 90° unassembled ...
Description:
Universal clam shell style straight or 90° unassembled unshielded cable clamps or backshell kits for jacketed cable. These AMPLIMITE unshielded cable clamps have grey thermoplastic housings with zinc plated steel 4-40 mounting screws, housing screws and hex nuts. The 90° ...
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits ...
Description:
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI ...
AMPLIMITE unassembled hinged box and lid unshielded cable ...
Description:
AMPLIMITE unassembled hinged box and lid unshielded cable clamps or backshell kits with a 180 and 90° exit. These AMPLIMITE box and lid unshielded backshells have black thermoplastic housings with a textured finish, black thermoplastic gates, black zinc plated steel ...
MH Connectors low profile D-connector hoods, MHDDCMR series, ...
Description:
MH Connectors low profile D-connector hoods, MHDDCMR series, this range of D-connector hoods are of Die Cast Zinc construction and offer cable 90 degree entry are re-openeable and offer excellent EMI connector protection with Nickel plating, full metal Jackscrews with ...