TE Connectivity ADK Series Series Zinc D-sub Connector Backshell, 9 Way, Strain Relief

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: NE
Productomschrijving

ADK Backshells

Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.
These backshells have self tapping T10 screws, a suitable driver would be 736-181

Specificaties
Kenmerk Waarde
Number of Contacts 9
D-Sub Shell Size E
Housing Material Zinc
Body Orientation Straight
Colour Silver
Strain Relief Yes
Series ADK Series
800 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 100)
4,321
(excl. BTW)
5,228
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
100 - 400
€ 4,321
€ 432,10
500 - 900
€ 3,681
€ 368,10
1000 - 1900
€ 3,132
€ 313,20
2000 +
€ 2,819
€ 281,90
*prijsindicatie
Related Products
AMPLIMITE HDP-20 Crimp Snap-In contact d-sub plug and ...
Description:
AMPLIMITE HDP-20 Crimp Snap-In contact d-sub plug and receptacle connectors for standard cable mounting. These AMPLIMITE HDP-20 Crimp Snap-In d-sub cable connectors have 94V-0 black thermoplastic inserts and are available with tin or zinc plated steel shells and with or ...
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits ...
Description:
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI ...