Amphenol FCI 8655MH Series Die Cast Zinc D-sub Connector Backshell, 9 Way, Strain Relief

  • RS-stocknr. 173-8724
  • Fabrikantnummer 8655MH0901BKLF
  • Fabrikant Amphenol FCI
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

FCI D-Subminiature Shielded Metal Hood with Straight Exit - Economical Series

Shielded EMI/RFI metal hood for use with d-type subminiature connectors. These cable mount shielded metal hoods are made from die cast zinc with a nickel plating, have a straight cable exit and a polycarbonate cable clamp strain relief. The jack screws for these d-sub metal hoods are available with a UNC 4.40 thread (part numbers suffixed with '01BKLF') or an M3 thread (part numbers suffixed with '02BKLF')

Note

-40°C

Standards

+120°C

Specificaties
Kenmerk Waarde
Number of Contacts 9
Housing Material Die Cast Zinc
D-Sub Shell Size E
Body Orientation Straight
Colour Silver
Strain Relief Yes
Housing Material Plating Nickel
Series 8655MH
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 100)
2,979
(excl. BTW)
3,605
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 2,979
€ 297,90
500 - 900
€ 2,52
€ 252,00
1000 - 1900
€ 2,162
€ 216,20
2000 +
€ 2,005
€ 200,50
*prijsindicatie
Related Products
From MH Connectors, a range of dual entry ...
Description:
From MH Connectors, a range of dual entry metal D-Sub connector back shells. The MHDU45 series of D-Sub hoods have twin 45° cable entry points suitable for 4.8 mm to 11.00 mm O/D cable. The hoods are held in place ...
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.
Strain Relief and Cover Kits for CHAMP IDC ...
Description:
Strain Relief and Cover Kits for CHAMP IDC connectors:The System 5 Series 50 position Strain Relief Cover kits, 739-0931 and 739-0940 have a 120° cable exit Ø 8.9-17.3 mm Black and Almond in colour respectively.The 14 position Strain Relief Cover ...
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...