ERNI KSG 200 Series PC Right Angle D-sub Connector Backshell, 9 Way

  • RS-stocknr. 224-1540
  • Fabrikantnummer 063389
  • Fabrikant ERNI
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: SI
Productomschrijving

Shielded Plastic Backshells

These backshells are ideally suited for use with ITT Cannon D*JK filter 'D' connectors
They provide an excellent solution for the D*W series as depth of the shell accommodates the extended insulator length of this range
EMI/RFI shielding obtained with integrated shielding sheets
ESD protected
Comes complete with M3 jackscrews (stock no. 224-1512) or 4-40 UNC jackscrews (stock nos 224-1562 and rest of module), cable support & assembly screws
Maximum height 40mm to cable entry

Specificaties
Kenmerk Waarde
Number of Contacts 9
Housing Material PC
D-Sub Shell Size E
Body Orientation Right Angle
Series KSG 200
581 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3350 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,69
(excl. BTW)
8,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 6,69
25 - 74
€ 5,82
75 - 199
€ 5,52
200 - 399
€ 5,38
400 +
€ 4,80
Related Products
These plastic hoods are supplied with short and ...
Description:
These plastic hoods are supplied with short and long jack screws, as well as anti-kink sleeving. The two halves of the hood lock into one another. The jack screws can also be fitted. The hoods can be fitted universally using ...
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.
Right Angle D-Sub Backshell | Ethernet 90° Entry ...
Description:
Right Angle D-Sub Backshell | Ethernet 90° Entry available in:Standard (9 pin, 15 pin, 25 pin) or High Density (15 pin, 26 pin, 44 pin)Available in die cast for over 70 dB shielding.Easy backshell assembly reduces manufacturing cost.Non-conductive grommet/strain relief ...
KSG 200 for Sub-D connectors to DIN 41 ...
Description:
KSG 200 for Sub-D connectors to DIN 41 652 and MIL -C24308 Shielding plates with a special lamellar configuration at shield transition pointsAssured ESD protectionEMC ensured by EMI/FRI shieldingReliable strain reliefSimple assembly/disassembly.