3M 103 Series Polymer D-sub Connector Backshell, 26 Way, Strain Relief

  • RS-stocknr. 448-4531
  • Fabrikantnummer 10326-52A0-008
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Plastic Backshells

This range of the 103 Series .050" Mini Delta Ribbon (MDR) Connectors Plastic Solder Plug Junction Shell - Non Shielded Backshells are available with Screw or Quick Release Latching Mechanism. The design of the 103 Series MDR Junction Shell features a two-piece glass reinforced Backshell with Ground Strap and a metal Strain Relief Clamp

Straight exit for round cables
Compatible with 101XX-3000PE Plug
Metal strain relief clamp provides grounding for cable shield

103xx-52F0-xxx = Quick Release Latching Mechanism
103xx-52A0-xxx = Jack Screw

//media.rs-online.com/t_line/L299458-01.gif

Mini Delta Ribbon (MDR)

Cable mount plugs and PCB mount receptacles with pre-loaded ribbon contacts for long life
Finger releasable latching backshells for cable mounting applications

A Mini Delta Ribbon (MDR) system designed for high density I/O applications on a 1.27mm pitch.

All products adhere to the following specification, with exceptions as noted below.  
Body material: Glass filled polyester (PBT)
Flammability: UL94V-0
Contact material/plating  
Beryllium copper Plating
Class II sockets 0.76μm gold
Cable plugs 0.76μm gold
’D’ connectors 0.76μm gold
Board mount sockets 0.3μm gold
   
Phosphor bronze  
Class III sockets 0.38μm gold
Class II headers 0.76μm gold
Class III headers 0.38μm gold
Transition connectors Tin plated
   
Insulation resistance: 1´109 ohms min. at 500Vdc
Current rating: 1A (headers 2A)
Withstanding voltage 1000V r.m.s.
Temperature range: -55°C to +105°C
   
Performance level:  
Class II 200 mating cycles
Class III 50 mating cycles
Note: 'D' type connectors include steel shells. Latches for Class III headers are of nylon.  
Specificaties
Kenmerk Waarde
Number of Contacts 26
Housing Material Polymer
Body Orientation Straight
Colour Black
Strain Relief Yes
Series 103
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
633 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,84
(excl. BTW)
8,28
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 6,84
15 - 49
€ 6,55
50 - 99
€ 5,65
100 - 249
€ 5,50
250 +
€ 4,95
Related Products
Strain Relief and Cover Kits for CHAMP IDC ...
Description:
Strain Relief and Cover Kits for CHAMP IDC connectors:The System 5 Series 50 position Strain Relief Cover kits, 739-0931 and 739-0940 have a 120° cable exit Ø 8.9-17.3 mm Black and Almond in colour respectively.The 14 position Strain Relief Cover ...
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
For use with slide locking hoods, see stock ...
Description:
For use with slide locking hoods, see stock no. 719-5837, allowing in-line cable coupling of D-sub connectorsSimple to couple and decoupleSuitable for straight or 90° cable entry.
The Provertha Quick Lock range of D-Sub plastic ...
Description:
The Provertha Quick Lock range of D-Sub plastic hoods offers a Push_Pull locking system for easy, fast, blind-mating and secure connection of D-Sub cable connectors to D-Sub device interfaces. The 103 series of Quick Lock hoods have 2 cable inputs ...