TE Connectivity AMPLIMITE Series Zinc Alloy D-sub Connector Backshell, 9 Way

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells

AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details.
Part numbers 5745171-x, 5745172-x, 5747173-x, 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper.
Part numbers 5745854-x, 5747099-x, 5745833-x, 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper.
Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets.
For ferrules see stock numbers 718-0730, 745-5791 and 680-9383 typically
For two piece spring latch see stock number 450-9321

Note

Jackscrews must be purchased separately
Shielded backshells will not accept connector housings with clinch nuts

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
Housing Material Zinc Alloy
D-Sub Shell Size E
Body Orientation Straight
Colour Silver
Series Amplimite
48 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
138 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,33
(excl. BTW)
8,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 7,33
25 - 74
€ 6,44
75 - 199
€ 6,12
200 - 399
€ 5,20
400 +
€ 4,94
Verpakkingsopties
Related Products
A range of small crimp flanges for use ...
Description:
A range of small crimp flanges for use with TE Connectivity standard rail and Quick Lock all metal shielded back shells. For compatible hoods see typical part numbers 139-0759, 139-1679 and 139-0769. Crimp flanges, when used with appropriately sized crimp ...
Provides strain relief and mechanical protection on straight ...
Description:
Provides strain relief and mechanical protection on straight D-subminiature connector terminationsAn adhesive seal to the connector and cable entry can be obtained by use of a S1125 adhesive (stock nos. 239-1516 and 441-4352).
These Amphenol Filtered D-Sub FCE17 Series Male to ...
Description:
These Amphenol Filtered D-Sub FCE17 Series Male to Female Adapters are supplied with Mounting Posts. Filter Capacitance of 470 pF, 1000 pF or 5600 pF are available indicated by a 1, 4 and 9 in the Manufacturers Part Number i.e. ...
KSG 200 for Sub-D connectors to DIN 41 ...
Description:
KSG 200 for Sub-D connectors to DIN 41 652 and MIL -C24308 Shielding plates with a special lamellar configuration at shield transition pointsAssured ESD protectionEMC ensured by EMI/FRI shieldingReliable strain reliefSimple assembly/disassembly.