Harting D-sub Series Metal Right Angle D-sub Connector Backshell, 25 Way, Strain Relief

  • RS-stocknr. 692-5902
  • Fabrikantnummer 09670250334
  • Fabrikant HARTING
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Harting Full Metal Top and Side Entry D-Sub Connector Hoods with Short Screws

A range of top and side entry d-sub connector hoods or backshells made from metal with short screw fastenings.
Part numbers 0967xxx0334 are backshells with a side cable entry and 4-40 UNC locking screws
Part numbers 0967xxx0335 are backshells with a side cable entry and M3 locking screws
Part numbers 0967xxx0344 are backshells with a top cable entry and 4-40 UNC locking screws
Part numbers 0967xxx0349 are backshells with a top cable entry and M3 locking screws

Specificaties
Kenmerk Waarde
Number of Contacts 25
D-Sub Shell Size B
Housing Material Metal
Body Orientation Right Angle
Strain Relief Yes
Series D-sub
23 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,40
(excl. BTW)
13,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 11,40
10 - 24
€ 10,04
25 +
€ 9,54
Verpakkingsopties
Related Products
The DL range of zero insertion force (ZIF) ...
Description:
The DL range of zero insertion force (ZIF) multi-pole connectors, with high contact densities is commonly used on diagnostic and test and instrumentation equipment in medical, computer, audio, broadcast and avionics industries. Back shells are supplied with cable strain relief ...
Shielded EMI/RFI metal hood for use with d-type ...
Description:
Shielded EMI/RFI metal hood for use with d-type subminiature connectors. These cable mount shielded metal hoods are made from die cast zinc with a nickel plating, have a straight cable exit and a polycarbonate cable clamp strain relief. The jack ...
Shielded metallised plastic hoods for d-type subminiature connectors. ...
Description:
Shielded metallised plastic hoods for d-type subminiature connectors. These universal metallised plastic hoods are made from thermoplastic with a metallised coating and have an angled cable exit with a metal screw fixing cable clamp strain relief.
These FMK Series Metal Hood Backshells have a ...
Description:
These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal ...